Figure 47

NOTICE:

SCSI Connections

Connecting to the SCSI Ports

Connecting to the SCSI Ports

This section describes how to connect to the system SCSI ports (single- ended and fast, wide).

System SCSI Port Connection

The system contains two (2) SCSI connectors:

•System Single-Ended SCSI Connector

•System Fast, Wide SCSI Connector

Figure 47 shows the two SCSI connectors. SCSI cables connect to these ports with a high-density thumb screw connector.

Single-ended SCSI

Fast, Wide SCSI

Rear Panel SCSI Connectors without Terminators

It is not necessary to put a terminator on empty SCSI connectors on the backpanel. However, the last device connected to the SCSI bus must be terminated with a SCSI terminator. All of the devices listed ship without terminators. If you do not already have a SCSI terminator, you must order a C2905A, 68-pin terminator for the fast, wide SCSI bus, or a C2904A, 50-pin high density terminator for the single-ended SCSI bus from Hewlett-Packard.

173