Interior Finishing, Exterior Finishing

INTERIOR FINISHING

If products cannot be ﬁnished immediately, cover with clear plastic to protect from dirt, damage and moisture. Remove any construction residue before ﬁnishing. Sand all wood surfaces lightly with 180 grit or ﬁner sandpaper. DO NOT use steel wool. BE CAREFUL NOT TO SCRATCH THE GLASS. Remove sanding dust.

Pella products must be ﬁnished per the below instructions; failure to follow these instructions voids the Limited Warranty.

•On casement and awnings, it is optional to paint, stain or ﬁnish the vertical and horizontal sash edges.

•On single-hung and double-hung, do not paint, stain or ﬁnish the vertical sash edges, any ﬁnish on the vertical sash edges may cause the sash to stick; it is optional to paint, stain or ﬁnish the horizontal sash edges.

•On patio doors, it is optional to paint, stain or ﬁnish the vertical and horizontal panel edges.

Note: To maintain proper product performance do not paint, ﬁnish or remove the weather- stripping, mohair dust pads, gaskets or vinyl parts. Air and water leakage will result if these parts are removed. After ﬁnishing, allow venting windows and doors to dry completely before

closing them.

Pella Corporation is not responsible for interior paint and stain ﬁnish imperfections for any product that is not factory-applied by Pella Corporation. Use of inappropriate ﬁnishes, solvents, brickwash, or cleaning chemicals will cause adverse reactions with window and door materials and voids the Limited Warranty.

For additional information on ﬁnishing see the Pella Owner’s Manual or go to www.pella.com.

EXTERIOR FINISHING

The exterior frame and sash are protected by aluminum cladding with our tough EnduraClad® or EnduraClad Plus baked-on factory ﬁnish that needs no painting. Clean this surface with mild soap and water. Stubborn stains and deposits may be removed with mineral spirits. DO NOT use abrasives. DO NOT scrape or use tools that might damage the surface.

Use of inappropriate ﬁnishes, solvents, brickwash or cleaning chemicals will cause adverse reactions with window and door materials and voids the Limited Warranty.

CARE AND MAINTENANCE

Care and maintenance information is available in the Pella Owner’s Manual. You can obtain an owner’s manual by contacting your local Pella retailer. This information is also available on www.pella.com.

IMPORTANT NOTICE

Because all construction must anticipate some water inﬁltration, it is important that the wall system be designed and constructed to properly manage moisture. Pella Corporation is not responsible for claims or damages caused by anticipated and unanticipated water inﬁltration; deﬁciencies in building design, construction and maintenance; failure to install Pella® products in accordance with Pella installation instructions; or the use of Pella products in wall systems which do not allow for proper management of moisture within the wall systems. The determination of the suitability of all building components, including the use of Pella products, as well as the design and installation of ﬂashing and sealing systems are the responsibility of the Buyer or User, the architect, contractor, installer, or other construction professional and are not the responsibility of Pella.

Pella products should not be used in barrier wall systems which do not allow for proper management of moisture within the wall systems, such as barrier Exterior Insulation and Finish Systems (EIFS) (also known as synthetic stucco), or other non-water managed systems. Except in the states of

California, New Mexico, Arizona, Nevada, Utah, and Colorado, Pella makes no warranty of any kind and assumes no responsibility for Pella windows and doors installed in barrier wall systems.

In the states listed above, the installation of Pella products in barrier wall or similar systems must be in accordance with Pella installation instructions.

Product modiﬁcations that are not approved by Pella Corporation will void the Limited Warranty.

80GY0102 specifications

The Pella 80GY0102 is a sophisticated and high-performance sliding patio door that exemplifies both elegance and functionality. Designed for homeowners seeking to enhance their living spaces, this door offers a perfect balance of beauty and energy efficiency, making it an ideal choice for both modern and traditional homes.

One of the most notable features of the Pella 80GY0102 is its exceptional energy efficiency. It utilizes advanced insulation technologies, including double or triple-pane glass options, which significantly reduce heat transfer. This means that the door helps maintain a comfortable indoor temperature, keeping homes warm in winter and cool in summer while helping to reduce energy bills. Additionally, the door is designed with Low-E (low emissivity) glass coatings that reflect infrared heat, further enhancing its energy-saving capabilities.

The frame of the Pella 80GY0102 is constructed from durable fiberglass or wood, which not only contributes to its aesthetic appeal but also ensures longevity and resilience against the elements. The sturdy construction helps in resisting warping, cracking, and rotting, making it a maintenance-free option for homeowners.

In terms of security, the Pella 80GY0102 does not compromise. It features a multi-point locking system that provides added security against intrusions, giving homeowners peace of mind. The lock's design allows for easy operation while ensuring that the door remains securely closed.

Another highlight of this patio door is its smooth sliding mechanism, which makes opening and closing effortless. The door's rollers are designed to glide smoothly, providing convenient access to outdoor spaces while minimizing wear over time. Additionally, homeowners can choose between various colors and finishes to complement their home’s exterior and interior décor.

Customization is a key aspect of the Pella 80GY0102. Homeowners can select from a variety of sizes, grid patterns, and hardware options to create a personalized look that fits their individual style and needs.

Overall, the Pella 80GY0102 stands out as an excellent option for those looking to enhance their home's aesthetics while prioritizing energy efficiency, durability, and security. Its cutting-edge features and customizable options make it a valuable addition to any residential property.