Pella 80GZ0102 Securing the Window, C1. Rectangular window, # Angle top window

Page 6

C1. Rectangular window:
Apply top ﬂashing tape. Cut two pieces of ﬂashing tape	$
long enough to go across the top of the window and
EXTEND NPAST THE mASHING TAPETON BOTHmSIDES !PPLY
ONENPIECEPOF TAPEELAPPING IT EONTO THE FRAME

cladding, covering the ﬁn and lapping onto the water resistive barrier. Fold the overlapping tape down, and press all tape down ﬁrmly. Apply the second piece of tape just above and overlapping THEHlRST PIECE OF mASHINGCTAPE BYY0RESSSTHE tape down ﬁrmly.

$

# Angle top window:

Apply top ﬂashing tape. /NNTHETSHORTTSIDE OFDAETRAPEZOIDI window, DO NOT allow the side ﬂashing tape to extend higher than the top tape will cover.

%

&YUFSJPS

D. Fold down top ﬂap OFOWATERWRESISTIVEEBARRIERR$

E. Apply ﬂashing tape to diagonal cuts. Cut

&

PIECES OFEmASHINGFTAPE ATSLEASTN LONGERPTHAN the diagonal cuts in the water resistive

barrier. Apply the tape covering the entire& diagonal cut in the resistive water barrier

at both upper corners of the window.

Note: Be sure to overlap the top corners (4E).

Note: If installing the window using installation clips, proceed to Step 6 - Installation Clip Method.

5SECURING THE WINDOW

A.Install a #10 x 3-1/2" corrosion resistant wood screw INTONEACH PREDRILLEDISCREWWHOLE

Note: Minimum 1-1/4" embedment into the wall framing is required.

Proceed to Step 7.

	#10 x 3-1/2"
	corrosion
5A	resistant
	wood screw

6 INSTALLATION CLIP METHOD

	A. Fasten the window to the opening BY DRIVING TWO Gv OR LONGER	6A
	CORROSIONIRESISTANT SCREWS INTOITHETPREPUNCHEDNHOLESEIN THE CLIPS )FF	6A

	clips are bent and fastened to the interior stud/block, install the screws
	as close to the bend as possible.

Note: DO NOT shim above the window. For masonry openings use two 3/16” x 1-1/2” masonry screws per clip. Pre-drill the masonry before attempting to drive the screws in.

Image 6

Contents Important Safety Information Rough Opening Preparation Cut the water resistive barrier 1CInstall and level sill spacers. Place Window PreparationRemove plastic wrap and cardboard packaging from window Setting and Fastening the Window Fasten the window to opening. On windows with a ﬁxedCircle top window Second layer Apply a# Angle top window Securing the WindowC1. Rectangular window Apply ﬂashing tape to diagonal cuts. CutInterior Seal Sealing the Window to the Exterior Wall CladdingCare and Maintenance Interior FinishExterior Finish Important Notice Additional Cutting Patterns

80GZ0102 specifications

The Pella 80GZ0102 window represents a blend of advanced technology and high-quality construction, designed to meet the modern homeowner's needs. This window model is a prime choice for those looking for energy efficiency, durability, and aesthetic appeal in their home.

One of the standout features of the Pella 80GZ0102 is its energy efficiency. This window is built with double or triple-pane glass options, which significantly reduce heat transfer and cold drafts. The Low-E (low-emissivity) glass coating reflects heat back into the room during winter and keeps solar heat out during summer, helping to maintain a consistent indoor temperature. This feature not only contributes to overall comfort but also leads to substantial energy savings, making it an eco-friendly choice.

Durability is another hallmark of the Pella 80GZ0102. This window features a solid wood core construction with an exterior made from high-quality vinyl that resists warping, fading, and cracking. The frame is designed to withstand harsh weather conditions, ensuring long-lasting performance without the need for frequent maintenance.

Aesthetically, the Pella 80GZ0102 does not disappoint. It is available in a variety of colors and finishes, allowing homeowners to customize their windows to complement their home's architecture. The options for grille patterns also add a touch of sophistication, giving buyers the chance to enhance their home's curb appeal.

In terms of functionality, the window features a smooth operating mechanism that ensures easy opening and closing. The design includes tightly sealed sashes that provide excellent protection against air and water infiltration, enhancing overall energy efficiency and comfort.

Furthermore, the Pella 80GZ0102 incorporates smart home technologies, including the option for integrated sensors that can alert homeowners to any potential issues with their windows, such as leaks or drafts. This level of innovation keeps homeowners informed and helps ensure the longevity of their investment.

Overall, the Pella 80GZ0102 window offers a compelling combination of energy efficiency, durability, aesthetic flexibility, and cutting-edge technology. Homeowners looking for a reliable and modern window solution will find that this model not only meets but exceeds expectations, blending functionality with style for an inviting home environment.