Harbor Freight Tools 90178 operating instructions Figure G

Flat Washers (part #10), four Spring Washers (part #9), and four Nuts (part #50) to secure the two Mixing Blades to the inside Drum assembly. (See Figure G.)

DRUM ASSEMBLY

(#44, #47)

MIXING

BLADE

(#46)MOUNT WITH V-SHAPED BENDS POINTING TO LEFT.

FIGURE G

10.Locate the Iron Tube Fixture (part #30) and Shaft (part #35) on the left side of the Cement Mixer. (See Figure H.)

IRON TUBE

FIXTURE

(#30)

SHAFT

(#35)

FIGURE H

11.Insert the Fixing Plate (part #18) onto the Shaft (part #35). (See Figure I, next page.)

12.Insert the Inner Cover (part #23) onto the Shaft (part #35). (See Figure J, next page.)

13.Align the mounting holes in the Inner Cover (part #23), Fixing Plate (part #18), and Iron Tube Fixture (part #30). Then secure the Inner Cover and Fixing Plate to the Iron Tube Fixture, using the hardware shown in Figure K.

(See Figure H & K)

SKU 90178 PAGE 10