Figure M

16.Unscrew the Thrust Screw (part #17) located in the Large Pulley (part #26). Align the Keyway Slot of the Large Pulley with the Key on the Shaft (part #35). Using a hammer, carefully tap the Large Pulley onto the Shaft. Retighten the Thrust Screw to secure the Large Pulley in place. (See Figure M.)

FIGURE M	LARGE PULLEY (#26)	SHAFT (#35)
FIGURE M

17.Loop the V-Belt (part #22) around the Large Pulley (part #26). Set the gasoline Engine (part #14) on the Engine Mount Plate (part #12) with its Small Pulley (part #16) facing the Inner Cover (part # 23). Then, loop the V-Belt around the Small Pulley. (See Figure N.)

LARGE PULLEY (#26)

INNER COVER (#23)

V-BELT (#22)

SMALL PULLEY (#16)

GASOLINE

ENGINE

(#14)

ENGINE MOUNT

PLATE

(#12)

FIGURE N

SKU 90178

PAGE 13

FIGURE N