Desa FSVYD18P installation manual Stove Cavity Assembly, Stove bottom

DESA INTERNATIONAL

VENT-FREE PROPANE/LP GAS STOVE HEATER

INSTALLATION

Continued

STOVE CAVITY ASSEMBLY

1.	Lift off corrugated box enclosing stove
	body crating.
2.	Remove all screws fastening the wood
	frame enclosure. Spread wood frame
	open and lift away from plastic-bagged
	stove body. The bottom pieces of pal-

Bolt

Product	Back Stove Panel
Identification Label

	let wood will remain bolted to the stove
	body.
3.	Remove plastic bag from stove body.
4.	Remove back panel from stove (see
	Figure 5). Use an adjustable wrench or
	a 10 mm socket. Remove six (6) bolts
	and washers. Keep bolts and washers
	to reattach back panel later.
5.	Remove all contents from inside stove
	cavity. Contents include:

(1) - Stove bottom

(4)- Legs (Amity™ and Townsend™ models include leg leveler bolts)

Figure 5 - Removing Back Panel

Top of Stove Unit

Front of

Stove Unit

Drop Cloth/

Blanket

Front of

Stove UnitTop of

Stove

Unit

Pallet Wood

Bolted to

Stove Body

Bottom

(1)- Bottom door

(1)- Top grate

(1)- Hardware kit bag with fasteners

6.Carefully lay stove body on back to attach bottom components to stove body (see Figure 6). Rest stove on drop cloth or blanket to avoid scratching stove edges.

7.Remove remaining pallet wood at- tached to bottom of stove body (see Figure 7). Use an adjustable wrench to remove bolts.

Figure 6 - Laying Down Stove On Side (Stove Style May Vary Depending on Model)

Front

Bolt	Pallet
	Wood

Bottom Of

Stove Unit

Pallet

Wood

Figure 7 - Removing Pallet Wood From The Bottom of The Stove

8 104462