Desa (F)SVYD18NR installation manual Stove Cavity Assembly, Use an adjustable wrench or

DESA INTERNATIONAL

VENT-FREE NATURAL GAS STOVE HEATER

INSTALLATION

Continued

STOVE CAVITY ASSEMBLY

1.	Lift off corrugated box enclosing stove
	body crating.
2.	Remove all screws fastening the wood
	frame enclosure. Spread wood frame
	open and lift away from plastic-
	bagged stove body. The bottom pieces
	of pallet wood will remain bolted to

Bolt

Product	Back Stove Panel
Identification Label

	the stove body.
3.	Remove plastic bag from stove body.
4.	Remove back panel from stove (see
	Figure 5). Use an adjustable wrench or
	a 10 mm socket. Remove six (6) bolts
	and washers. Keep bolts and washers
	to reattach back panel later.
5.	Remove all contents from inside stove
	cavity. Contents include:

(1) - Stove bottom

(4)- Legs (Amity and Townsend models include leg leveler bolts)

(1)	- Bottom door
(1)	- Top grate
(1)	- Hardware kit bag with fasteners

Figure 5 - Removing Back Panel

Top of Stove Unit

Front of

Stove Unit

Drop Cloth/

Blanket

Front of

Stove UnitTop of

Stove

Unit

Pallet Wood

Bolted to

Stove Body

Bottom

6.	Carefully lay stove body on back to
	attach bottom components to stove
	body (see Figure 6). Rest stove on drop
	cloth or blanket to avoid scratching
	stove edges.
7.	Remove remaining pallet wood at-
	tached to bottom of stove body (see
	Figure 7). Use an adjustable wrench to
	remove bolts.

Figure 6 - Laying Down Stove On Side (Stove Style May Vary Depending on Model)

Front

Bolt	Pallet
	Wood

Bottom Of

Stove Unit

Pallet

Wood

Figure 7 - Removing Pallet Wood From The Bottom of The Stove

8 104461