Ignition, Before your first fire | Drolet Wood Stove manual

Smaller pieces of wood will dry faster. All logs exceeding 6" (152 mm) should be split. The wood should be stored in a place where the grass is not too long, in such a way that prevailing winds may circulate through the fire logs. A 24" to 48" (610 mm to 1219 mm) air space should be left between each row of fire logs, which should be placed in the sunniest location possible. If the wood must be stored outside, the upper layer of wood should be protected from rain and bad weather but not the sides.

Before your first fire:

-Check if firebricks are lined-up properly.

-If applicable, remove the plastic protector covering the gold trims.

-Make sure that the chimney and flue pipe are well installed according to specifications.

-Respect all clearances to combustibles and floor protection according to the unit you have chosen.

-If you are not sure that your installation is adequate, do not hesitate to contact your Drolet dealer.

IGNITION

The installation of a log cradle is NOT RECOMMENDED in your DROLET wood stove.

After making sure that the stove air intake controls are fully open, place several rumpled sheets of paper at the center of the firebox. Place 8 to 10 pieces of small dry kindling wood over the paper in the form of a tent. You may also place a few pieces of firewood, but choose them as small as possible. No chemical product (or accelerant) should be used to light the fire.

Before igniting the paper and kindling wood, it is recommended that you warm up the chimney. This is done in order to avoid backdraft problems often due to negative pressure in the house; cold air from the outside tends to penetrate into the house by the chimney and creates a “clog” effect.

If such is the case, open a window slightly near the stove and twist together a few sheets of newspaper into a torch. Light up this paper torch and hold it as close as possible to the mouth of the pipe inside the firebox to warm up the chimney. Once the updraft movement is initiated, you are ready to ignite the stove by lighting the paper and kindling wood inside the combustion chamber.

We advise you to leave the door slightly open (a few inches) for a 5 to 10 minutes period, under supervision, in order to allow for good combustion. After this time, you may close the door and progressively adjust the air controls to obtain the desired temperature.

CAUTION:

-Do not leave the stove unattended when the door is slightly open.

-When the stove is used for the first time, intense fire is prohibited in order to allow adequate curing of the paint covering the stove and to prevent a "thermal shock" which may remove or whiten the paint.

-Make sure the room is well ventilated, to remove the bad odors emitted from the paint, during the first two or three hours of usage.

-Never heat the stove outside the house before you install it. It is impossible to adequately monitor the combustion intensity, which may cause overheating and a thermal shock to the paint.

-Never use fluid or chemical products to ignite the fire.

-Do not burn wastes, flammable fluid such as gasoline, naphtha or motor oil.

Wood Stove specifications

Drolet Wood Stoves are renowned for their exceptional heating performance and efficient wood-burning technology, making them a popular choice for homeowners seeking an eco-friendly and cost-effective alternative to traditional heating systems. Founded in Quebec, Canada, Drolet has established itself as a leader in the wood stove industry, providing reliable heating solutions that combine innovative engineering with a commitment to sustainability.

One of the main features of Drolet Wood Stoves is their high-efficiency ratings. Many models boast efficiencies exceeding 80%, allowing users to make the most of their firewood while minimizing emissions. This focus on efficiency not only helps homeowners save on fuel costs but also reduces the environmental impact associated with wood burning. The stoves are designed to meet or exceed stringent EPA emissions standards, ensuring cleaner air quality in the home and surrounding environment.

The technologies integrated into Drolet Wood Stoves are state-of-the-art. The stoves utilize secondary combustion technology, which injects heated air into the combustion chamber, igniting unburned gases and particulates. This process enhances the burning of wood and maximizes heat output while reducing smoke production. Additionally, many models feature a built-in air-wash system that helps keep the glass door clean, providing a clear view of the mesmerizing fire.

Drolet Wood Stoves are constructed with durable materials, including heavy-gauge steel and high-temperature paint finishes, ensuring longevity and resilience against the rigors of everyday use. The design of these stoves is both functional and aesthetically pleasing, with various styles and sizes available to suit different home decors and heating needs. Some models come equipped with advanced features like programmable thermostats and rear or side venting options for versatile installation.

Furthermore, Drolet offers a range of products that include freestanding, fireplace inserts, and cookstoves, making it easy for customers to find a solution that fits their specific space and heating requirements. Users can also select from various accessories to enhance their wood stove experience, including insulated chimneys and heat shields.

In conclusion, Drolet Wood Stoves combine efficiency, innovative technology, and stylish design, providing an effective and sustainable heating solution ideal for any home. With a focus on delivering top-notch performance and environmental responsibility, Drolet continues to be a trusted name in the world of wood burning.