Chimney

Your wood stove may be hooked up with a prefabricated or masonry chimney. If you are using a prefab chimney, it must comply with S-629 standards; therefore it must be approved for up to 2100oF (650° C). It is extremely important that it be installed according to the manufacturer's specifications.

If you are using a masonry chimney, it is important that it be built in compliance with the specifications of the National Building Code. It must be lined with refractory bricks, metal or clay tiles sealed together with fire cement. (Round flues are the most efficient).

The interior diameter of the chimney flue must be identical to that of the stove smoke exhaust. A flue which is too small may cause draft problems, while a large flue favors rapid cooling of the gas, thus enhancing creosote build-up and the risk of chimney fires. Current practice requires that the area of the chimney flue do not exceed the stove exhaust area by more than 35%. For a round pipe, 35% of the area represent approximately 1” (25 mm) on the diameter. (ex: For a stove with an exhaust of 6”, the chimney flue should not exceed 7” of diameter.) Note that it is the chimney and not the stove which creates the draft effect; your stove's performance is directly dependent on an adequate draft from your chimney.

The following recommendations may be useful for the installation of your chimney:

1)It must rise above the roof at least 3' (0,9 m) from the uppermost point of contact.

2)The chimney must exceed any part of the building or other obstruction within a 10' (3,04 m) distance by a height of 2' (0,60 m).

3)Installation of an interior chimney is always preferable to an exterior chimney. Indeed, the interior chimney will by definition be hotter than an exterior chimney, being heated up by the ambient air in the house. Therefore the gases which circulate will cool more slowly thus reducing the build-up of creosote and the risk of chimney fires.

The draft, which is created by the tendency for hot air to rise, will be better with an interior chimney.

4)You must not install more than one heating unit per chimney flue.

5)The use of a fire-screen at the extremity of the chimney requires regular inspection in order to insure that it is not obstructed.

STEP BY STEP INSTALLATION OF YOUR CHIMNEY

Note : The way to install your chimney may vary from one chimney manufacturer to another. The instructions contained in this manual are based on the recommendations of chimney manufacturers whose products are sold at many Canadian retailers of wood stoves and related heating accessories.

WALL SUPPORT SYSTEM

If your chimney must rise along an outside wall, you need to connect it to your stove through an adjacent wall. For this type of installation, the following items are normally required :

Chimney

•Suitable lengths of chimney (enough to go up to your roof)

•An adjustable wall support

•A wall thimble

•An adequate number of wall bands (one for every 8 feet of chimney, excluding the roof portion)

•A stove pipe adapter

•One insulated tee & plug

•A chimney cap.

•Roof guys (if required)

Wood Stove specifications

Drolet Wood Stoves are renowned for their exceptional heating performance and efficient wood-burning technology, making them a popular choice for homeowners seeking an eco-friendly and cost-effective alternative to traditional heating systems. Founded in Quebec, Canada, Drolet has established itself as a leader in the wood stove industry, providing reliable heating solutions that combine innovative engineering with a commitment to sustainability.

One of the main features of Drolet Wood Stoves is their high-efficiency ratings. Many models boast efficiencies exceeding 80%, allowing users to make the most of their firewood while minimizing emissions. This focus on efficiency not only helps homeowners save on fuel costs but also reduces the environmental impact associated with wood burning. The stoves are designed to meet or exceed stringent EPA emissions standards, ensuring cleaner air quality in the home and surrounding environment.

The technologies integrated into Drolet Wood Stoves are state-of-the-art. The stoves utilize secondary combustion technology, which injects heated air into the combustion chamber, igniting unburned gases and particulates. This process enhances the burning of wood and maximizes heat output while reducing smoke production. Additionally, many models feature a built-in air-wash system that helps keep the glass door clean, providing a clear view of the mesmerizing fire.

Drolet Wood Stoves are constructed with durable materials, including heavy-gauge steel and high-temperature paint finishes, ensuring longevity and resilience against the rigors of everyday use. The design of these stoves is both functional and aesthetically pleasing, with various styles and sizes available to suit different home decors and heating needs. Some models come equipped with advanced features like programmable thermostats and rear or side venting options for versatile installation.

Furthermore, Drolet offers a range of products that include freestanding, fireplace inserts, and cookstoves, making it easy for customers to find a solution that fits their specific space and heating requirements. Users can also select from various accessories to enhance their wood stove experience, including insulated chimneys and heat shields.

In conclusion, Drolet Wood Stoves combine efficiency, innovative technology, and stylish design, providing an effective and sustainable heating solution ideal for any home. With a focus on delivering top-notch performance and environmental responsibility, Drolet continues to be a trusted name in the world of wood burning.