|
|
|
|
|
|
| Initial Installation | |||
|
|
|
|
|
|
| QUALIFIED INSTALLERS ONLY | |||
the termination and the wall. The arrow on the vent termination |
| |||||||||
should |
| be | pointing up, insure that the proper clearances to | 10" | ||||||
combustible materials are maintained. | (254mm) | |||||||||
| ||||||||||
5. Before connecting the horizontal run of the vent pipe to the vent |
| |||||||||
termination, slide the black decorative wall thimble cover over the | 10" | |||||||||
vent pipe. |
|
|
|
|
|
| (254mm) | |||
|
|
|
|
|
|
| ||||
6. Slide the appliance and vent assembly towards the wall, carefully |
| |||||||||
inserting the vent pipe into the cap assembly. It is important that |
| |||||||||
the vent pipe extend into the vent cap a sufficient distance with a |
| |||||||||
minimum of 11⁄4” (3.2cm) overlap. Secure the connection between |
| |||||||||
the vent cap pipe and the vent cap by attaching the two sheet |
| |||||||||
metal straps extending from the vent cap assembly into the outer |
| |||||||||
wall of the vent pipe. Use the two sheet metal screws provided to |
| |||||||||
connect the straps to the vent pipe. Bend any remaining portion of | Figure 27: Wall Framing Hole for | |||||||||
the sheet metal straps back towards the vent cap, so the decorative | ||||||||||
Horizontal Installation. | ||||||||||
wall thimble will conceal it (see left image in Figure 28). |
| |||||||||
7. Slide | the | decorative | wall | 11/4" |
| |||||
thimble | up | to | the | wall |
| |||||
surface | and | attach | with | (3.2cm) |
| |||||
|
| |||||||||
the screws | provided. Apply | Fold strap | Woodscrews | |||||||
decorative | brass | or | chrome | here |
| |||||
trim if desired (see right |
|
| ||||||||
image in Figure 28). |
|
| Sheet metal |
| ||||||
|
|
|
|
|
|
|
|
| ||
NOTES: |
|
|
|
|
|
|
| screws |
| |
(a) The four (4) wood screws |
|
| ||||||||
provided |
| should | be | replaced |
|
| ||||
with the appropriate fasteners | Wall Thimble |
| ||||||||
for stucco, brick, concrete, or | Strap |
| ||||||||
other types of siding. |
|
| Figure 28: Installing Decorative Wall Thimble. | |||||||
|
|
|
|
|
|
|
| |||
Figure 29: Installing Vent Cap with Vinyl Siding | Figure 30: Installing Horizontal Vent |
Termination. |
18