Enviro 50-1266 Operating Instructions, Slider / Damper Must be SET AT Time of Installation

Page 7

Operating Instructions

SLIDER / DAMPER SETTING:

THE SLIDER / DAMPER MUST BE SET AT TIME OF INSTALLATION.

A Qualified Service Technician or Installer must set the Slider Damper.

•If the fire should happen to go out and the heat output indicator has been set on the lowest setting, the Slider Damper should be pushed in slightly, decreasing the air in the firebox.

•If, after long periods of burning, the fire builds up and overflows the burn pot or there is a build up of clinkers, this would be a sign that the pellet quality is poor, this requires more primary air, the slider damper must be pulled out to compensate. Pulling the slider damper out gives the fire more air.

The easiest way to make sure that an efficient flame is achieved is to understand the characteristics of the fire.

•A tall, lazy flame with dark orange tips requires more air – Open slider (pull out) slightly.

•A short, brisk flame, like a

blowtorch, has too much air

– Close slider (push in) slightly.

•If the flame is in the middle of these two characteristics with a bright yellow/orange, active flame with no black tips then the air is set for proper operation.

The combustion exhaust blower is a variable speed blower controlled by the heat output setting. This blower will increse or decrease the blower speed as the heat output setting is turned up or down.

Figure 2: Efficient Flame.

SPECIAL NOTES:

Pellet quality is a major factor in how the pellet stove will operate. If the pellets have a high moisture content or ash content the fire will be less efficient and has a higher possibility of the fire building up and creating clinkers (hard ash build-up). If this happens, pull the Slider / Damper out slightly to increase the air flow to the fire.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Empress Table of Contents Store pellets at least 36 1 m away from the pellet stove IntroductionUSE of Cordwood is Prohibited by LAW Keep ASH PAN Free of RAW Fuel Empress Dimensions SpecificationsOperating Instructions Slider / Damper Must be SET AT Time of InstallationSpecial Notes Heat Level Adjustment When Heat Output Indicator ShowsInitial START-UP See above Thermostat / Switch ModeBurn POT and Liner 2-3 days Routine Cleaning and MaintenanceTools Required to Clean Unit Door Glass Cleaning When neededDo not Place Unburned or RAW Pellet Fuel in ASH PAN Replacing Door Glass Post Season CLEAN-UPCleaning Surfaces Firebox PanelTo the Distributor WarrantyFor the do-it-yourself Individual Name of Owner Address Installation Data Sheet

C-11112, 50-1266 specifications

Enviro 50-1266, also known by its designation C-11112, is a cutting-edge product that stands out in the realm of environmentally friendly solutions. It is designed with a focus on sustainability while delivering high performance in various applications. One of its main features is its biodegradable composition, which significantly reduces environmental impact compared to traditional products. This aspect appeals to both consumers and businesses looking to adopt greener practices.

The product is formulated using advanced technologies that enhance its effectiveness. One of these technologies involves the incorporation of bio-based materials that exhibit exceptional durability and resistance to degradation. This ensures that the product maintains its integrity over time, even in challenging environments, while still being safe for the ecosystem.

Furthermore, Enviro 50-1266 features a unique formulation that allows for versatile usage across different sectors, from agriculture to industrial applications. Whether used as a cleaner, lubricant, or in manufacturing processes, its performance remains consistent and reliable. Additionally, the product is designed to be user-friendly, facilitating easy application without the need for specialized equipment or extensive training.

Another noteworthy characteristic of Enviro 50-1266 is its non-toxic nature, making it suitable for use around children and pets. This feature broadens its appeal, particularly among environmentally conscious consumers and organizations. The product not only meets but often exceeds regulatory standards for safety and environmental compliance, further establishing its credibility in the market.

In terms of customer support, the manufacturers provide comprehensive resources, including detailed guidelines for optimal use and applications. They also offer responsive customer service to address any inquiries or concerns, which enhances the overall user experience.

In summary, Enviro 50-1266, C-11112, is a versatile, sustainable solution that excels in various applications while prioritizing environmental responsibility. Its biodegradable composition, advanced manufacturing technologies, and user-friendly characteristics make it a notable choice for those seeking effective and eco-friendly alternatives. With a commitment to safety and compliance, this product not only meets modern demands but also contributes positively to the preservation of our planet.
Top Page Image Contents