Enviro 1200 Fireplace Insert, C-10240, 1700 Freestanding, 1700 Fireplace Insert, 50-1040 Venting

Installation

MASONRY FIREPLACE INSTALLATION - FREESTANDING:

Unless you are experienced, we recommend installation by your dealer or a professional installer.

Many venting manufacturers		Rain Cap
		Chimney	Steel Plate or Flashing
have listed kits available to
		Support and Clamp
connect a stove to a masonry
fireplace.	Always follow
the vent	manufacturer’s	Rigid Stainless
installation instructions.		Steel Liner

The existing damper
may have to be removed	Listed Liner
to allow installation.
	Stove pipe must
	end higher than liner
		Damper Removed
	Flexible Stainless	or Fastened Open
	Steel Section
		Stainless Steel
		Connector Pipe
	Clean-out tee
	Clean-out
	cover	Masonry Fireplace
		Floor Protection
		Combustible Floor

Figure 27: Freestanding Installation into existing fireplace.

MOBILE HOME INSTALLATION - FREESTANDING:

SPECIAL REQUIREMENTS: Pedestal models 1200 and 1700 are approved for mobile homes. All freestanding installation requirements in “Installation Of A Listed, Factory Built Chimney”, must comply with all local codes that may apply, and the following must be met:

VENTING:

In Canada: Any ULC-S629 listed chimney system with the accompanying double-wall vent connector.

In U.S.A. Any UL-103-HT listed chimney system with the accompanying double-wall vent connector. Do not connect a listed chimney of one manufacture with a listed double wall connector from another manufacture.

26