Enviro 1700 Freestanding, C-10240, 1200 Fireplace Insert, 50-1040 Exclusions and Limitations

Page 43

Warranty

6.If the problem is not covered by the Limited Warranty, the customer will be responsible for all repair costs, as well as all storage, shipping and the cost of removing and re-installing the stove.

7.If you are not satisfied with the service provided by the Enviro dealer, write to Sherwood Industries Ltd. at the address listed on the last page of the Owner’s Manual. Include the date you bought the product and a description of the problem.

Exclusions and Limitations:

1.A qualified installer must install this stove. This Limited Warranty covers defects in materials and workmanship only if the product has been installed in accordance with local building and fire codes; in their absence, refer to the owner’s/technical manual(s). If the product is damaged or broken as a result of any alteration, wilful abuse, mishandling, accident, neglect, or misuse of the product, the Limited Warranty does not apply.

2.It must be operated and maintained at all times in accordance with the instructions in the Owner’s Manual. If the unit shows signs of neglect or misuse, it is not covered under the terms of the Limited Warranty policy. Performance problems due to operator error will not be covered by the Limited Warranty policy.

3.Labour to repair or replace items covered under the Limited Warranty will be covered for the first five (5) years per our warranty service fee reimbursement schedule.

4.This Limited Warranty is applicable only to the original purchaser and it is non-transferable, provided that the purchase was made through an authorized Enviro dealer.

5.Discoloration and some minor expansion, contraction, or movement of certain parts and resulting noise, is normal and not a defect and, therefore, not covered under Limited Warranty. Misuse includes overfiring. This will result if the stove is used in such a way that one or more of the plates glows red. Overfiring can be identified later by warped plates and paint pigment being burnt off. Over-firing this appliance can cause serious damage and will nullify the Limited Warranty.

6.The Limited Warranty does not cover misuse of the stove glass, including:

a)The glass is struck or has surface contaminates or has had harsh or abrasive cleaners used on it.

b)The door is slammed or is closed while wood in the firebox is protruding out the stove opening.

7.Products made or provided by other manufacturers and used in conjunction with the operation of this stove without prior authorization from Sherwood Industries Ltd., may nullify the Limited Warranty on this stove. If unsure as to the extent of this Limited Warranty, contact your authorized Enviro dealer before installation.

8.Sherwood Industries Ltd. will not be responsible for inadequate performance caused by environmental conditions. The Limited Warranty does not cover installation and operational related problems such as use of downdrafts or spillage caused by environmental conditions. Environmental conditions include but are not limited to nearby trees, buildings, roof tops, wind, hills, mountains, inadequate venting or ventilation, excessive offsets, negative air pressures or other influences caused by mechanical systems such as furnaces, fans, clothes dryers etc.

9.The Limited Warranty does not cover damage caused by burning salt-saturated wood, corrosive driftwood, chemically treated wood or any fuel not recommended in the Owner’s Manual (use cord wood only).

10.The Limited Warranty is void if:

a)The stove has been operated in atmospheres contaminated by chlorine, fluorine or other damaging chemicals.

b)The stove is subject to submersion in water or prolonged periods of dampness or condensation.

c)Any damage to the unit, combustion chamber or other components due to water, or weather damage which is the result of, but not limited to, improper chimney/venting installation.

43

Page 42 Page 44
Image 43
Page 42 Page 44
Contents Wood Stove Table of Contents Safety Precautions First Start Operating InstructionsCreosote ITS Formation and Removal Helpful Hints Worth Repeating What type of wood is best to use as firewood? What can cause a poor draft? 1200 Air Flow Path Specifications Capacity Feet3 0.0708 meter3 Approximate heating area † From front of unit to edge of floor protection Maintain These Minimum Clearances to Unshielded Combustibles 1700 Freestanding Clearance to Combustibles 1200 Insert Dimensions 1200 Freestanding Flat Top Dimensions 1700 Freestanding Flat Top Dimensions 1200 Freestanding with Fan Kit Dimensions Bolts to remove InstallationInstalling Heat Shield Recommended Height for Flue Pipe Chimney Through Wall Method a Roof Clearances Shield if required Installation into a masonry chimney Venting Outside AIR Insert Installation into existing fireplace With hearth Attaching removable flue Total Bricks Model 1700 Brick Placement Do not USE Door if Glass is Broken Installation of Ceramic Baffle Back View of Freestanding Unit with Fan Kit Removal of right pod This will keep the trim tight Parts List Parts List Parts Diagram Parts Diagram Pedestals & Legs Parts Diagram Fireplace Insert Limited Five 5 Year Warranty Limited One 1 Year Warranty WarrantyExclusions and Limitations Warranty Installation Data Sheet

1200 Fireplace Insert, 50-1040, 1200 Freestanding, 1700 Fireplace Insert, C-10240 specifications

The Enviro 1700 Freestanding, C-10240, 1700 Fireplace Insert, and 1200 Freestanding models are exceptional choices for those seeking both aesthetic appeal and efficient heating performance. These fireplaces combine advanced technology with modern design, making them suitable for various home styles while providing effective warmth.

One of the standout features of the Enviro 1700 Freestanding unit is its elegant design. Its clean lines and contemporary look allow it to blend seamlessly into any room. The fireplace is constructed from high-quality materials, ensuring durability and longevity. This model is designed to produce maximum heat output while minimizing wood consumption, making it an eco-friendly option.

The C-10240 model, designed for those who prefer a traditional fireplace insert, showcases a unique combination of classic design with innovative technology. This insert provides the warmth and ambiance of a classic wood-burning fire without compromising efficiency. It is equipped with a powerful combustion system that ensures a clean burn, reducing emissions and providing a sustainable heating solution for homes.

The 1700 Fireplace Insert model is perfect for homeowners looking for an effective way to upgrade their existing fireplace. This insert offers the benefits of modern heating technology while maintaining the charm of a traditional fireplace. It features an expansive viewing area, allowing for an impressive display of flames and creating a cozy atmosphere. Its robust design ensures that it fits snugly into existing hearths, providing an instant upgrade.

The 1200 Freestanding model is designed for versatility. Whether placed in the center of a room or in a corner, it offers a 360-degree view of the fire. This model utilizes advanced clean-burning technology, ensuring that the fire produces minimal smoke and pollutants. Its efficient heat distribution system allows for optimal warmth, making it an excellent choice for heating larger spaces.

All these models feature advanced air wash systems that keep the glass door clean for unobstructed views of the flames. Additional options, such as direct venting and multi-fuel capabilities, further enhance their flexibility and performance. Whether you opt for the 1700 Freestanding, C-10240, 1700 Fireplace Insert, or the 1200 Freestanding, you can be assured of reliable heat, stunning views, and environmentally friendly operation throughout the colder months.
Top Page Image Contents