Enviro 1000, 1600INS manual Optional FAN Installation, Wiring Diagram

Page 15

OPTIONAL FAN INSTALLATION

The appliance when installed, must be electrically connected and grounded in accordance with local codes or in the absence of local codes, with the current CSA C22.1 CANADIAN ELECTRICAL CODE. Part 1, SAFETY STANDARDS FOR ELECTRICAL INSTALLATIONS, or THE NATIONAL ELECTRICAL CODE ANSI / NFPA 70 in the USA.

CAUTION

Label all wires

prior to

disconnection when servicing controls. Wiring errors can cause improper and dangerous operation. Verify proper operation after servicing.

1)Remove the fan assembly from the box and inspect for any damage to the assembly.

2)Remove the metal knock out on the rear of the appliance.

3)Install two screws into the top two holes. Place the blower assembly over these two screws and tighten. Install the two bottom screws and tighten.

4)Plug the fan assembly in and check for proper operation.

DO NOT cut or remove the grounding prong from the plug. Also do not route the power cord beneath the heater.

WARNING: ELECTRICAL GROUNDING INSTRUCTIONS.

This appliance is equipped with a three-prong (grounding) plug for your protection against shock hazard and should be plugged into a properly grounded three-prong receptacle.

WIRING DIAGRAM

This is a basic wiring diagram for the option fan installation. Models 1000, 1600, 2100 Freestanding units only.

1)Plug the fan assembly into a three prong (grounded) receptacle.

2)Turn the fan controller to the desired setting.

3)Once the unit has reached operating temperature, the fan temperature sensor will turn the fan on automatically.

4)When the unit cools down the fan temperature sensor will shut the fan off automatically.

15

Image 15
Contents Envirofire Please Read and Save Instructions Table of ContentsOperating Instructions Fire Extinguisher and Smoke Detection Cleaning and Replacing the GlassMaintenance Disposal of AshesPedestal and LEG Installation PedestalLegs and ASH PAN Partial Bricks Model 1000 Brick PlacementWhen Replacing Bricks USE only Clayburn Type Fire Bricks Full Size BricksModel 1600 Brick Placement Model 2100 Brick Placement Chimney Freestanding InstallationFloor Protection To Install a LISTED, Factory Built ChimneyAlcove Installation Outside AIRVenting Mobile Home InstallationRequired Clearances to Combustibles from Insert Model 1600 INS Fireplace InsertHOW IT Works SpecificationsDoor Installation Wiring Diagram Optional FAN InstallationMade in Canada Model 1000 Suitable for USE in Mobile HomesParts and Accessiories To the Dealer WarrantyWood Stove

1600INS, 1600, 1000 specifications

Enviro 1000, 1600, and 1600INS are advanced vehicles designed and manufactured by the renowned British company, Environmental Vehicle Technologies. These models are tailored for urban and semi-urban environments, offering eco-friendly transport solutions that address the growing demand for sustainable alternatives in public and commercial transport.

The Enviro 1000 model emphasizes efficiency and compactness, making it perfect for bustling city streets. This vehicle features an innovative lightweight design, which enhances fuel efficiency and reduces carbon emissions. Its state-of-the-art engine delivers a smooth and reliable driving experience while meeting stringent environmental standards. The interior is thoughtfully designed for passenger comfort, offering ergonomic seating and ample space.

The Enviro 1600 model takes sustainability a step further. Featuring an enhanced powertrain, it incorporates hybrid technology, enabling it to switch between traditional fuels and electric power seamlessly. This versatility not only lowers operating costs but also significantly decreases the vehicle's carbon footprint. The 1600 models have larger seating capacities, making them ideal for public transport systems in larger urban areas. Advanced safety features, including an automatic braking system and multiple airbag deployment, ensure the well-being of passengers and drivers alike.

Meanwhile, the Enviro 1600INS stands out with its innovative insulation technology. This additional feature enhances energy conservation, particularly useful in extreme weather conditions. The insulated body helps maintain a stable internal climate, reducing reliance on heating or air conditioning systems. This model is especially favored by transit agencies seeking to provide year-round comfort for passengers without escalating energy costs.

All Enviro models are equipped with smart technologies including real-time tracking systems, which improve route optimization and schedules, thereby enhancing overall service efficiency. They also come with fully integrated infotainment systems, ensuring passengers enjoy a pleasant travel experience.

In summary, the Enviro 1000, 1600, and 1600INS are cutting-edge vehicles designed to promote sustainable urban transport. With a focus on efficiency, enhanced safety features, hybrid technology, and innovative insulation solutions, these models epitomize the future of eco-friendly mobility, catering to the needs of modern cities while prioritizing environmental stewardship. As cities continue to grow, the demand for such versatile and sustainable vehicles will undoubtedly increase, positioning the Enviro range as frontrunners in the eco-transport revolution.