Enviro 1600INS manual Model 1000 Suitable for USE in Mobile Homes, Made in Canada

Page 16

DO NOT REMOVE THIS LABEL LISTED SOLID FUEL SPACE HEATER SERIAL NO.

MODEL:

1000

1600

WH-

2100

1600 INS

MODEL 1000 SUITABLE FOR USE IN MOBILE HOMES.

CERTIFIED FOR CANADA AND THE U.S.A.

REPORT NO. J99011443-231

TESTED TO CSA B366.2/ULC-S627, ULC-S628-M93, UL-1482-1994

REPORT NO. 6385

INSTALL AND USE ONLY IN ACCORDANCE WITH THE MANUFACTURERS INSTALLATION AND OPERATING INSTRUCTIONS. CONTACT LOCAL BUILDING OR FIRE OFFICIALS ABOUT RESTRICTIONS AND INSTALLATION INSPECTION IN YOUR AREA. USE 6 IN. / 150 MM DIAMETER MINIMUM 24 MSG BLACK OR 25 MSG BLUED STEEL CONNECTOR LISTED FACTORY-BUILT CHIMNEY SUITABLE FOR USE WITH SOLID FUELS OR MASONRY CHIMNEY. SEE LOCAL BUILDING CODE AND MANUFACTURER’S INSTRUCTIONS FOR PRECAUTIONS REQUIRED FOR PASSING A CHIMNEY THROUGH A COMBUSTIBLE WALL OR CEILING. DO NOT PASS CHIMNEY CONNECTOR THROUGH A COMBUSTIBLE WALL OR CEILING. MINIMUM CLEARANCES FROM HORIZONTAL CONNECTOR AND CEILING (18 IN./ 455 MM) DO NOT CONNECT THIS UNIT TO A CHIMNEY FLUE SERVICING ANOTHER APPLIANCE U.S.A. ONLY.

MINIMUM CLEARANCES TO COMBUSTIBLE MATERIALS

RESIDENTIAL INSTALLATIONS USING SINGLE WALL CONNECTOR. WITH ANY ULC-S629 LISTED CHIMNEY IN CANADA , AND

ANY UL 103 HT LISTED CHIMNEY SYSTEMS IN THE U.S.A.

 

 

MODEL :1000

MODEL: 1600

MODEL: 2100

SIDE WALL TO UNIT

A

19 IN. / 485 MM

20 IN. / 510 MM

22 IN. / 560 MM

BACK WALL TO UNIT

B

10 IN. / 255 MM

12 IN. / 305 MM

12 IN. / 305 MM

CORNER TO UNIT

C

6 IN. / 150 MM

6 IN. / 150 MM

8 IN. / 205 MM

SIDE WALL TO CONNECTOR

D

28 IN. / 710 MM

29 IN. / 735 MM

31 IN. / 790 MM

BACK WALL TO CONNECTOR

E

13 IN. / 330 MM

16.5 IN. / 420 MM

16.5 IN. / 420 MM

CORNER TO CONNECTOR

F

16 IN. / 405 MM

16.5 IN. / /420 MM

19 IN. / 485 MM

COMPONENTS REQUIRED FOR MOBILE HOME INSTALLATIONS: MODELS 1000 AND 1600

IN CANADA: ANY ULC-629 LISTED CHIMNEY SYSTEM WITH THE ACCOMPANYING DOUBLE WALL VENT CONNECTOR

IN U.S.A.: ANY HT-103 LISTED CHIMNEY SYSTEM WITH THE ACCOMPANYING DOUBLE WALL VENT CONNECTOR

SPECIFIED CLEARANCES APPLY AND UNITS MAY BE INSTALLED IN CONVENTIONAL HOMES IF SPECIFIED CONNECTORS ARE USED.

 

 

MODEL 1000

MODEL 1600

SIDE WALL TO UNIT

A

14 IN./ 355 MM

11 IN. / 280 MM

BACK WALL TO UNIT

B

6 IN. / 150 MM

4 IN. / 101 MM

CORNER TO UNIT

C

2 IN. / 50 MM

6 IN. / 153 MM

SIDE WALL TO CONNECTOR

D

23 IN. / 585 MM

20 IN. / 508 MM

BACK WALL TO CONNECTOR

E

9 IN. / 230 MM

8.25 IN. / 210 MM

CORNER TO CONNECTOR

F

11.5 IN. / 290 MM

15.5 IN. / 394 MM

MODEL 1000 MAY BE INSTALLED IN AN ALCOVE: ALCOVE DEPTH, 4 FT. /1.22 M, HEIGHT 7 FT. 2.13 M

MODEL 1600 MAY BE INSTALLED IN AN ALCOVE: ALCOVE DEPTH 30” (76 CM) HEIGHT 70”(178 CM) WIDTH 48” (122 CM)

ROOM HEATER, SOLID FUEL TYPE, SUITABLE FOR MOBILE HOMES

If a stove is installed on a combustible floor, it must have a pedestal attached and be on a NON COMBUSTIBLE hearth pad extending at least 8” (200 mm) to each side, and 18” (455 mm) to the front

MODEL 1600 INS MAY BE INSTALLED AS AN INSERT IN A MASONRY

FIREPLACE.

MINIMUM CLEARANCES TO COMBUSTIBLE MATERIALS (MEASURE TO UNIT)

 

 

MODEL 1600 INS

ADJACENT SIDE WALL

A

17 IN. / 430 MM

MANTLE

B

28 IN. / 710 MM

TOP FACING

C

28 IN. / 710 MM

SIDE FACING

D

1 IN. / 25 MM

HEARTH EXTENSION MUST BE RAISED (F) 8 IN. / 205 MM ABOVE A SURROUNDING COMBUSTIBLE FLOOR. COMBUSTIBLE FLOOR MUST BE PROTECTED BY A NON-COMBUSTIBLE MATERIAL EXTENDING (E) 18 IN.

455 MM TO THE FRONT OF THE UNIT AND (F) 8 IN. / 205 MM TO THE SIDES

OPERATE ONLY WITH THE DOOR AND ASH PAN CLOSED. ONLY OPEN DOOR TO FEED FIRE. FOR USE WITH SOLID WOOD FUELS ONLY. DO NOT USE GRATE OR ELEVATE-FIRE BUILD WOOD FIRE DIRECTLY ON HEARTH. DO NOT OVERFIRE, DO NOT OBSTRUCT COMBUSTION AIR OPENINGS.. IF HEATER OR CHIMNEY CONNECTOR GLOWS, YOU ARE OVERFIRING. INSPECT AND CLEAN CHIMNEY FREQUENTLY-UNDER CERTAIN CONDITIONS OF USE, CREOSOTE BUILDUP MAY OCCUR RAPIDLY. KEEP FURNISHING AND OTHER COMBUSTIBLES WELL AWAY FROM HEATER. REPLACE GLASS ONLY WITH CERAMIC GLASS. OPTIONAL COMPONENTS: FAN, ELECTRICAL RATING 115V, 60 Hz 1 AMP.

ROUTE CORD AWAY FROM HEATER.

MANUFACTURED BY: SHERWOOD INDUSTRIES LTD. 6782 OLDFIELD RD.

VICTORIA B.C V8M-2A3

MADE IN CANADA

CAUTION

HOT WHILE IN OPERATION. DO NOT TOUCH. KEEP CHILDREN, CLOTHING AND FURNITURE AWAY. CONTACT MAY CAUSE SKIN BURN. READ NAMEPLATE AND INSTRUCTIONS.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Envirofire Table of Contents Please Read and Save InstructionsOperating Instructions Cleaning and Replacing the Glass MaintenanceDisposal of Ashes Fire Extinguisher and Smoke DetectionPedestal Pedestal and LEG InstallationLegs and ASH PAN Model 1000 Brick Placement When Replacing Bricks USE only Clayburn Type Fire BricksFull Size Bricks Partial BricksModel 1600 Brick Placement Model 2100 Brick Placement Freestanding Installation ChimneyTo Install a LISTED, Factory Built Chimney Alcove InstallationOutside AIR Floor ProtectionMobile Home Installation VentingModel 1600 INS Fireplace Insert Required Clearances to Combustibles from InsertSpecifications HOW IT WorksDoor Installation Optional FAN Installation Wiring DiagramModel 1000 Suitable for USE in Mobile Homes Made in CanadaParts and Accessiories Warranty To the DealerWood Stove

1600INS, 1600, 1000 specifications

Enviro 1000, 1600, and 1600INS are advanced vehicles designed and manufactured by the renowned British company, Environmental Vehicle Technologies. These models are tailored for urban and semi-urban environments, offering eco-friendly transport solutions that address the growing demand for sustainable alternatives in public and commercial transport.

The Enviro 1000 model emphasizes efficiency and compactness, making it perfect for bustling city streets. This vehicle features an innovative lightweight design, which enhances fuel efficiency and reduces carbon emissions. Its state-of-the-art engine delivers a smooth and reliable driving experience while meeting stringent environmental standards. The interior is thoughtfully designed for passenger comfort, offering ergonomic seating and ample space.

The Enviro 1600 model takes sustainability a step further. Featuring an enhanced powertrain, it incorporates hybrid technology, enabling it to switch between traditional fuels and electric power seamlessly. This versatility not only lowers operating costs but also significantly decreases the vehicle's carbon footprint. The 1600 models have larger seating capacities, making them ideal for public transport systems in larger urban areas. Advanced safety features, including an automatic braking system and multiple airbag deployment, ensure the well-being of passengers and drivers alike.

Meanwhile, the Enviro 1600INS stands out with its innovative insulation technology. This additional feature enhances energy conservation, particularly useful in extreme weather conditions. The insulated body helps maintain a stable internal climate, reducing reliance on heating or air conditioning systems. This model is especially favored by transit agencies seeking to provide year-round comfort for passengers without escalating energy costs.

All Enviro models are equipped with smart technologies including real-time tracking systems, which improve route optimization and schedules, thereby enhancing overall service efficiency. They also come with fully integrated infotainment systems, ensuring passengers enjoy a pleasant travel experience.

In summary, the Enviro 1000, 1600, and 1600INS are cutting-edge vehicles designed to promote sustainable urban transport. With a focus on efficiency, enhanced safety features, hybrid technology, and innovative insulation solutions, these models epitomize the future of eco-friendly mobility, catering to the needs of modern cities while prioritizing environmental stewardship. As cities continue to grow, the demand for such versatile and sustainable vehicles will undoubtedly increase, positioning the Enviro range as frontrunners in the eco-transport revolution.
Top Page Image Contents