Freestanding Installation, Chimney | Enviro 1000, 1600INS guide

FREESTANDING

INSTALLATION:

CHIMNEY:

Vent the stove into a clean, lined, approved masonry chimney in good condition, conforming to local building codes or a listed 6” factory built chimney suitable for use with solid fuels and conforming to, ULC-S629 in CANADA or UL- 103HT in the U.S.A.. Connect the stove to this chimney with a short and straight 6” (150 mm), 25 gauge or heavier, single wall black or blued steel smoke pipe. Connection to all masonry chimneys must be a metal or masonry thimble cemented in place. All smoke pipe must slope upwards, all connections must be tight and secured with three sheet metal screws equally spaced. The smoke pipe length should not exceed 40% of the chimney height above the stove.

A non-combustible floor protector is required under all freestanding units. The floor protection must extend 18” (457 mm) in front of the unit and 8” (203 mm) to each side. When venting into a masonry chimney the floor protector must be installed directly below the chimney vent and 2” (50.8 mm) on either side of the chimney vent.

DO NOT CONNECT THIS UNIT TO A

CHIMNEY FLUE SERVING ANOTHER APPLIANCE.

MAINTAIN THESE MINIMUM CLEARANCES TO UNSHIELDED COMBUSTIBLES*

				DOUBLE WALL	DOUBLE WALL
				PIPE**	PIPE**
	MODEL 1000	MODEL 1600	MODEL 2100	MODEL 1000	MODEL 1600

A. SIDE TO UNIT	19 “ (485 MM)	20” (510 MM)	22” (560 MM)	14” (355 MM)	11” (280 MM)

B. REAR TO UNIT	10” (2556 MM)	12” (300 MM)	12” (300 MM)	6” (150 MM)	4” (101 MM)

C. CORNER TO UNIT	6” (150 MM)	6” (150 MM)	8” (200 MM)	2” (50 MM)	6” (150 MM)

D. SIDE TO COLLAR	28” (710 MM)	29” (735 MM)	31” (790 MM)	23’ (585 MM)	20” (508 MM)

E. REAR TO COLLAR	13” (330 MM)	16.5” (420 MM)	16.5” (420 MM)	9” ( 230 MM)	8.25” (210 MM)

F. CORNER TO COLLAR	16” (405 MM)	16.5” (420 MM)	19 “ (485 MM)	11.5” (290 MM)	15.5” (394 MM)

CAUTION: AN UN INSULATED SMOKE PIPE MUST NOT PASS THROUGH AN ATTIC, ROOF SPACE, CLOSET OR SIMILAR CONCEALED SPACE, OR THROUGH A FLOOR, CEILING, WALL, OR PARTITION, OR ANY COMBUSTIBLE CONSTRUCTION.

*ALL CLEARANCES CAN BE REDUCED WITH SHIELDING ACCEPTABLE TO THE LOCAL AUTHORITY.

**DOUBLE WALL: IN CANADA: ANY ULC-629 LISTED CHIMNEY SYSTEM WITH THE ACCOMPANYING LISTED DOUBLE WALL VENT CONNECTOR.

IN U.S.A.: ANY HT-103 LISTED CHIMNEY SYSTEM WITH THE ACCOMPANYING

LISTED DOUBLE WALL VENT CONNECTOR.

1600INS, 1600, 1000 specifications

Enviro 1000, 1600, and 1600INS are advanced vehicles designed and manufactured by the renowned British company, Environmental Vehicle Technologies. These models are tailored for urban and semi-urban environments, offering eco-friendly transport solutions that address the growing demand for sustainable alternatives in public and commercial transport.

The Enviro 1000 model emphasizes efficiency and compactness, making it perfect for bustling city streets. This vehicle features an innovative lightweight design, which enhances fuel efficiency and reduces carbon emissions. Its state-of-the-art engine delivers a smooth and reliable driving experience while meeting stringent environmental standards. The interior is thoughtfully designed for passenger comfort, offering ergonomic seating and ample space.

The Enviro 1600 model takes sustainability a step further. Featuring an enhanced powertrain, it incorporates hybrid technology, enabling it to switch between traditional fuels and electric power seamlessly. This versatility not only lowers operating costs but also significantly decreases the vehicle's carbon footprint. The 1600 models have larger seating capacities, making them ideal for public transport systems in larger urban areas. Advanced safety features, including an automatic braking system and multiple airbag deployment, ensure the well-being of passengers and drivers alike.

Meanwhile, the Enviro 1600INS stands out with its innovative insulation technology. This additional feature enhances energy conservation, particularly useful in extreme weather conditions. The insulated body helps maintain a stable internal climate, reducing reliance on heating or air conditioning systems. This model is especially favored by transit agencies seeking to provide year-round comfort for passengers without escalating energy costs.

All Enviro models are equipped with smart technologies including real-time tracking systems, which improve route optimization and schedules, thereby enhancing overall service efficiency. They also come with fully integrated infotainment systems, ensuring passengers enjoy a pleasant travel experience.

In summary, the Enviro 1000, 1600, and 1600INS are cutting-edge vehicles designed to promote sustainable urban transport. With a focus on efficiency, enhanced safety features, hybrid technology, and innovative insulation solutions, these models epitomize the future of eco-friendly mobility, catering to the needs of modern cities while prioritizing environmental stewardship. As cities continue to grow, the demand for such versatile and sustainable vehicles will undoubtedly increase, positioning the Enviro range as frontrunners in the eco-transport revolution.