Harman Stove Company Super Magnum Coal Stoker Stove 3Getting Started, Appliance Location

Page 6

Super-Magnum Coal Stoker Stove

3Getting Started

A. Design, Installation & Location Considerations

1. Appliance Location

Consideration must be given to safety, convenience, traffic flow, and the fact that the appliance will need a chimney and chimney connector. It is a good idea to plan your installation on paper, using exact measure- ments for clearances and floor protection, before actu- ally beginning the installation.

Maintain specified vent clearance to combustible re- quirements listed by the vent manufacturers instruc- tions and all clearance to combustibles listed in this manual.

Check with your local building code agency before you begin your installation. Be sure local codes do not supersede UL specifications and always obtain the required permit so that insurance protection benefits cannot be unexpectedly cancelled. If any assistance is required during installation, please contact your dealer.

We recommend that a qualified building inspector and your insurance company representative review your plans before and after the installation.

2. Room Sensor Location

The room sensor's location will have some effect on the appliance's operation. When the sensor is located close to the appliance, it may require a higher setting to keep the rest of the house comfortable. If the sensor is located in an adjacent room, or farther away from the stove, you will notice higher temperatures near the appliance.

B. Fire Safety

Maintain the designated clearances to combustibles. Insulation must not touch the chimney. You must maintain the designated air space around the chimney. This space around a chimney is necessary to allow natural heat removal from the area. Insulation in this space will cause a heat buildup, which may ignite wood framing. NOTE: Clearances may only be reduced by means approved by the regulatory authority having jurisdiction.

To provide reasonable fire safety, the following should be given serious consideration:

1.Install at least one smoke detector on each floor of your home. Detectors should be located away from the heating appliance and close to sleeping areas. Follow the smoke detector manufacturer's placement and installation instructions, and be sure to maintain regularly.

2.A conveniently located Class A fire extinguisher to contend with small fires resulting from burning embers.

3.A practiced evacuation plan, consisting of at least two escape routes.

4.A plan to deal with a hopper fire as follows: In the event of a hopper fire:

a.Evacuate the house immediately.

b.Notify Fire Department.

CAUTION

•Do NOT connect this unit to a chimney flue servicing another appliance.

•Do NOT connect to any forced air distribution duct or system.

CAUTION

Fire Hazard

•Do not operate appliance before reading and understanding the operating instructions.

•Failure to operate properly may cause a house fire.

6

Do Not Burn Wet Coal!

3-90-02702R4_08/12

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Installation and Operation Super-Magnum Coal Stoker StoveInstallation When This Room Heater Is Not ProperlyInstalled, a House Fire May Result Restrictions InstallationTable of Contents This appliance is also approved for installation in a shop 1Listing and Code ApprovalsMobile Home Approved 2Special Warnings and Notes Wet Coal Prevent Rust & Corrosion3Getting Started Appliance LocationRoom Sensor Location Component Locations Pre- Use Check List Fire Risk4Dimensions & Clearances Floor Protection ParallelCorner RequirementsDraft Chimney Connectors5Chimneys and Venting Wall Pass-thrusChimney 3-foot, 2-foot, 10 foot ruleVenting to a Masonry Chimney Installing to a Prefabricated ChimneyExisting Masonry Chimneys Venting to a Masonry Fireplace ChimneyDraft Test Procedure Mobile Home Installation 6Mobile Home7Appliance Set-Up Outside Air AttachmentAir Filter Leveling the ApplianceOptional Heat Transfer Kit Optional Decorative Tile KitRoom Sensor Installation Optional Door Trim KitFuel Specifications ESP Exhaust Sensing ProbeStatus Light Error Messages Circuit BoardTemperature Dial Feed Rate AdjustmentMode Selection Blower Speed AdjustmentFire Characteristics Before Your First FireStarting Your First Fire Troubleshooting Symptom Possible Cause Corrective ActionQuick Reference Maintenance Chart 10Service & MaintenanceShut-down Procedure Soot Formation and Need For RemovalGeneral Maintenance Procedures Door Glass Air Filter Frequency Monthly By User FireboxHopper Chimney Chimney ConnectorMotors and Components Feed MotorDistribution Blower ESP- Exhaust Sensing ProbeFines Scraper- in feeder 11Reference Materials Supermagnum Coal Stoker #Service Parts 90-02700-1 Part number list on followingStocked at Depot 20 x 1/2 Alloy Steel Black Oxide Button Head Cap Screw At Depot Stocked#44 Motor Mount Assembly Limited Lifetime Warranty Hearth & Home Technologies IncWarranty Conditions This warranty is void ifService & Maintenance Log 90-02702R408/12 Do Not Burn Wet Coal Signature of Boxer Proudly Printed On 100% Recycled Paper

Super Magnum Coal Stoker Stove specifications

The Harman Stove Company Super Magnum Coal Stoker Stove is a remarkable heating solution that combines efficiency, reliability, and advanced technology to provide optimal warmth for your home. This stove is specifically designed to burn anthracite coal, a high-quality fuel that offers many advantages in heating.

One of the main features of the Super Magnum is its impressive heat output. It is capable of producing an astounding 140,000 BTUs per hour, making it suitable for larger spaces and even whole-home heating. This powerful output ensures that your environment stays warm and comfortable, even on the coldest winter nights.

The construction of the Super Magnum is another highlight. Built from high-quality steel, it is designed to withstand the rigors of continuous use. The stove features a large ash pan, which simplifies the maintenance process. With its easy-open access, homeowners can replace the ash quickly, ensuring that the appliance operates smoothly and efficiently.

In addition to its durable build, the Harman Super Magnum utilizes cutting-edge technologies to enhance performance. One of these technologies is the TWICE® System, which manages the internal combustion process to maximize heat output while minimizing emissions. This advanced system helps in maintaining a clean burn, making it an environmentally friendly option compared to traditional wood-burning stoves.

The stove also features a unique stoker system that automatically feeds coal into the burning chamber. This automated process not only ensures consistent heating but also reduces the need for constant monitoring. Users can set the desired temperature, and the stoker will adjust the fuel supply accordingly, allowing for a hassle-free heating experience.

Additionally, the Super Magnum is equipped with an integrated blower system that helps distribute warmth evenly throughout the space. The adjustable blower allows for customization based on the space's needs, ensuring that every corner of your home is comfortably heated.

Overall, the Harman Stove Company Super Magnum Coal Stoker Stove stands out as a powerful and technologically advanced heating solution. With its robust construction, impressive BTU output, automatic fuel feeding system, and advanced combustion management, it is an excellent option for those looking to efficiently heat their homes using coal. The Super Magnum not only provides comfort but also peace of mind, knowing that you have a reliable heating source ready to take on the cold season.
Top Page Image Contents