Harman Stove Company Super Magnum Coal Stoker Stove Before Your First Fire, Fire Characteristics

Page 22

Super-Magnum Coal Stoker Stove

C. Before Your First Fire

Be sure the appliance is installed properly and that all safety requirements have been met. Pay particular attention to the clearances to combustibles, floor protection and the venting instructions.

Test your smoke detector(s) and CO detector(s) to the specifications of the manufacturer.

Double check that the ash pan and internal firebox are empty.

Be sure to read this entire manual.

D. Starting Your First Fire

1.With the mode selector in the "OFF" position, and the Feed Adjuster NOT on "Test", plug the power cord into a properly grounded receptacle.

2.Fill the hopper with DRY coal.

3.Place some coal on the burn grate, filling the valley in the back.

4.Turn the mode selector dial to the desired mode.

If Room Temp is selected, be sure to turn the temperature dial above the current room temperature.

5.Fill the rest of the grates with a mixture of wood pellets, rice coal, and starting gel.

6.Light the starting gel with a match, and close the door.

7.Only after the ESP temperature increases, will the feeder start operating to increase the fire size.

NEVER APPLY STARTING GEL TO THE STARTING MIXTURE WITHOUT THE COMBUSTION BLOWER OPERATING.

warning

"NEVER USE GASOLINE, GASOLINE-TYPE LANTERN FUEL, KEROSENE, CHARCOAL LIGHTER FLUID, OR SIMILAR LIQUIDS TO START OR "FRESHEN UP " A FIRE IN THIS HEATER. KEEP ALL SUCH LIQUIDS WELL AWAY FROM THE HEATER WHILE IN USE".

E. Fire Characteristics

After lighting the fire, it will go through a few different stages of appearance. First, because of the wood pellets mixed in, you'll see mostly tall yellow flames. As the wood pellets burn away, and some coal begins to ignite, your yellow flames will shorten and mix with blue flames. After the wood pellets are gone and the coal is the only thing burning, you'll see mostly blue flames, which can be invisible in a brightly lit area. As the fire settles in, you'll have about a two inch band of hot burning coals running across the grates. With a maximum temperature demand, the ideal feed rate setting will put this band approximately 1-2 inches back from the end of the grates. Allow at least an hour of burn time between adjustments to the feed rate.

The setting above will produce continuous medium heat output with the distribution blower at low speed.

The setting above will produce continuous maximum heat output with the distribution blower at full speed.

22 Do Not Burn Wet Coal!

3-90-02702R4_08/12

Image 22
Contents Installation and Operation Super-Magnum Coal Stoker StoveInstallation When This Room Heater Is Not ProperlyInstalled, a House Fire May Result Restrictions InstallationTable of Contents 1Listing and Code Approvals This appliance is also approved for installation in a shopMobile Home Approved 2Special Warnings and Notes Wet Coal Prevent Rust & CorrosionAppliance Location 3Getting StartedRoom Sensor Location Component Locations Pre- Use Check List Fire Risk4Dimensions & Clearances Floor Protection ParallelCorner RequirementsDraft Chimney Connectors5Chimneys and Venting Wall Pass-thrusChimney 3-foot, 2-foot, 10 foot ruleVenting to a Masonry Chimney Installing to a Prefabricated ChimneyExisting Masonry Chimneys Venting to a Masonry Fireplace ChimneyDraft Test Procedure Mobile Home Installation 6Mobile Home7Appliance Set-Up Outside Air AttachmentAir Filter Leveling the ApplianceOptional Heat Transfer Kit Optional Decorative Tile KitRoom Sensor Installation Optional Door Trim KitFuel Specifications ESP Exhaust Sensing ProbeStatus Light Error Messages Circuit BoardTemperature Dial Feed Rate AdjustmentMode Selection Blower Speed AdjustmentBefore Your First Fire Fire CharacteristicsStarting Your First Fire Troubleshooting Symptom Possible Cause Corrective ActionQuick Reference Maintenance Chart 10Service & MaintenanceShut-down Procedure Soot Formation and Need For RemovalGeneral Maintenance Procedures Door Glass Firebox Air Filter Frequency Monthly By UserHopper Chimney Chimney ConnectorMotors and Components Feed MotorESP- Exhaust Sensing Probe Distribution BlowerFines Scraper- in feeder 11Reference Materials Supermagnum Coal Stoker #Service Parts 90-02700-1 Part number list on followingStocked at Depot 20 x 1/2 Alloy Steel Black Oxide Button Head Cap Screw At Depot Stocked#44 Motor Mount Assembly Limited Lifetime Warranty Hearth & Home Technologies IncWarranty Conditions This warranty is void ifService & Maintenance Log 90-02702R408/12 Do Not Burn Wet Coal Signature of Boxer Proudly Printed On 100% Recycled Paper

Super Magnum Coal Stoker Stove specifications

The Harman Stove Company Super Magnum Coal Stoker Stove is a remarkable heating solution that combines efficiency, reliability, and advanced technology to provide optimal warmth for your home. This stove is specifically designed to burn anthracite coal, a high-quality fuel that offers many advantages in heating.

One of the main features of the Super Magnum is its impressive heat output. It is capable of producing an astounding 140,000 BTUs per hour, making it suitable for larger spaces and even whole-home heating. This powerful output ensures that your environment stays warm and comfortable, even on the coldest winter nights.

The construction of the Super Magnum is another highlight. Built from high-quality steel, it is designed to withstand the rigors of continuous use. The stove features a large ash pan, which simplifies the maintenance process. With its easy-open access, homeowners can replace the ash quickly, ensuring that the appliance operates smoothly and efficiently.

In addition to its durable build, the Harman Super Magnum utilizes cutting-edge technologies to enhance performance. One of these technologies is the TWICE® System, which manages the internal combustion process to maximize heat output while minimizing emissions. This advanced system helps in maintaining a clean burn, making it an environmentally friendly option compared to traditional wood-burning stoves.

The stove also features a unique stoker system that automatically feeds coal into the burning chamber. This automated process not only ensures consistent heating but also reduces the need for constant monitoring. Users can set the desired temperature, and the stoker will adjust the fuel supply accordingly, allowing for a hassle-free heating experience.

Additionally, the Super Magnum is equipped with an integrated blower system that helps distribute warmth evenly throughout the space. The adjustable blower allows for customization based on the space's needs, ensuring that every corner of your home is comfortably heated.

Overall, the Harman Stove Company Super Magnum Coal Stoker Stove stands out as a powerful and technologically advanced heating solution. With its robust construction, impressive BTU output, automatic fuel feeding system, and advanced combustion management, it is an excellent option for those looking to efficiently heat their homes using coal. The Super Magnum not only provides comfort but also peace of mind, knowing that you have a reliable heating source ready to take on the cold season.