Harman Stove Company manual P61-2 Manual Start UP, Operation Starting First Fire

Page 12

P61-2 MANUAL START UP

Fig. 17

Fig. 18

Fig. 19

1"

Fig. 20

Operation

Starting First Fire

Be sure the power cord is plugged into a 120 volt receptacle. This can be verified by the red power light on the control panel.

Fill the hopper with pellets.

Fill the burn pot with pellets to a level just short of overflowing, fig. 17.

Adjust feed rate. If this is your first fire or you are trying different pellets, set the feed adjuster to "3", fig. 18. This is a conservative number and will prob- ably need to be increased. After you know a feed rate setting that works well, use that setting. Re- member, too high a feed rate will waste fuel.

Turn Mode selector to "OFF" and then to "Stove Temp". This will turn the combustion blower to high. When starting a fire always turn the mode selector to "OFF" before selecting the desired mode. This resets the control for start- up.

Turn Temp Dial to 7. This will allow the stove to burn at maximum for feed rate adjusting pur- poses.

Apply starting gel to pellets in burn pot and light the gel. Close the door after lighting. At this point the distribution and combustion lights will be on and the feed motor light will be off. As the tem- perature of the fire increases, the feed motor light will come on and pellets will feed into the burn pot. As the stove temperature increases the dis- tribution blower speed will increase.

After 30 to 45 minutes it may be necessary to read- just the feed rate. The feed rate should be ad- justed so there is about one inch of ash in front of the fire, fig. 20. This is a maximum burn position and usually does not achieve this position under normal burn rates.

"NEVER USE GASOLINE, GASOLINE-TYPE LANTERN FUEL, KEROSENE, CHARCOAL LIGHTER FLUID, OR SIMILAR LIQUIDS TO START OR "FRESHEN UP " A FIRE IN THIS HEATER. KEEP ALL SUCH LIQUIDS WELL AWAY FROM THE HEATER WHILE IN USE".

12

Image 12
Contents Installation & Operating Manual Safety NoticePage Table of Contents Assembly and Installation Removing or Installing rear cover panelsUnpacking FirebrickInstallation InstallingMobile Home Installation With outside air installed, 18î With outside air installed, 6 feetVenting Vent Pipe Outside AirVentingnting #1 Preferred method#2 Preferred method #4 Installing into an existing chimney US only #5 Installing into an existing fireplace chimney US onlyVentingVenting #7 Installing into an existing chimney US and Canada VentingVentiMinimum flue vent configuration #8 Installing through the ceiling ventP61-2 Manual Start UP Operation Starting First FireFill the hopper with pellets When to use Stove Temp Mode When to use Room Temp ModeShut-Down Procedure P61-2 Manual IGNITION/OPERATIONPower Light Indicates power to the control Status Light P61ESP-2 EspcontrolcontrolRoom Sensor and Rear Shield Installation Room Sensor Installation Rear ShieldsMaintenance CleaningRemoving Ashes Soot and Fly Ash Trouble-Shooting Cleaning Burn PotP61-2 Feeder and Specifications Specifications23.5P61-2 Wiring Diagram Door Options Optional TrimOptions Side Heat ShieldsHopper Extension P61 Parts List 90-05802Harman Gold Warranty Harman Gold Warranty Year Transferable Limited

P61-2 specifications

The Harman Stove Company P61-2 is a premier pellet stove that stands out for its blend of efficiency, convenience, and advanced technology. Designed for both aesthetics and functionality, the P61-2 offers homeowners an exceptional heating solution for their living spaces.

One of the standout features of the P61-2 is its robust heating capability. This stove can produce an impressive heat output of up to 50,000 BTUs, effectively warming spaces up to 2,500 square feet. This makes it ideal for larger rooms or open floor plans, ensuring that the ambient temperature remains comfortable even on the coldest winter nights.

The P61-2 is designed with an innovative hopper capacity of 60 pounds, allowing for extended burn times of up to 24 hours on a single fill. This feature significantly reduces the frequency of refueling, making it an incredibly user-friendly option. The stove's automated feed system further enhances convenience by regulating the flow of pellets according to the heat setting, ensuring a consistent and efficient burn.

Another defining characteristic of the P61-2 is its advanced control system. Featuring a digital thermostat, users can easily set and adjust temperatures, providing a seamless heating experience. The stove also includes a programmable timer, allowing homeowners to schedule heating cycles according to their needs, ensuring warmth is on when it's needed most.

In terms of design, the P61-2 boasts a modern aesthetic that can complement various home interiors. It is available in multiple finishes, including classic black, providing a touch of elegance alongside powerful heating performance. The large viewing window allows users to enjoy the mesmerizing flames while benefiting from the stove's efficient heating capabilities.

The P61-2 also emphasizes environmentally conscious heating. It meets stringent EPA standards with low emissions, making it a cleaner alternative to traditional wood-burning stoves. This not only benefits the environment but also contributes to better indoor air quality.

Additionally, the Harman Stove Company has integrated user-friendly features such as a self-cleaning firepot and easy access to components for maintenance. This ensures that keeping the P61-2 in optimal condition is a straightforward process.

In conclusion, the Harman Stove Company P61-2 is a technologically advanced, efficient, and stylish pellet stove that masterfully combines performance with practicality. Whether for its powerful heating capabilities, user-friendly controls, or modern aesthetics, the P61-2 remains a top choice for those seeking a reliable and effective heating solution for their homes.