Venting

Requirements for Terminating the Venting WARNING: Venting terminals must not be re-

cessed into a wall or siding.

NOTE: Only PL vent pipe wall pass-throughs and fire stops should be used when venting through combustible materials.

NOTE: Always take into consideration the ef- fect the prevailing wind direction or other wind cur- rents will cause with flyash and /or smoke when plac- ing the termination.

In addition, the following must be observed: A. The clearance above grade must be a mini-

mum of 18".1

B. The clearance to a window or door that may be opened must be a minimum of 48".1

( with outside air installed, 18î )

C. A 12" clearance to a permanently closed window is recommended to prevent condensation on the window.

D. The vertical clearance to a ventilated soffit located above the terminal within a horizontal dis- tance of 2 feet (60 cm) from the center-line of the terminal must be a minimum of 18".

E. The clearance to an unventilated soffit must be a minimum of 12".

F. The clearance to an outside corner is 11" from center of pipe.

G. The clearance to an inside corner is 12".

H.A vent must not be installed within 3 feet (90 cm) above a meter/regulator assembly when mea- sured from the horizontal center-line of the regula- tor.1

I.The clearance to service regulator vent outlet must be a minimum of 6 feet.1

J. The clearance to a non-mechanical air sup- ply inlet to the building or the combustion air inlet to any other appliance must be a minimum of 48î.1

K. The clearance to a mechanical air supply inlet must be a minimum of 10 feet.1

(with outside air installed, 6 feet )

L. The clearance above a paved sidewalk or a paved driveway located on public property must be a minimum of 7 feet.1,2

M. The clearance under a veranda, porch, deck or balcony must be a minimum of 12 inches.1,3

NOTE: The clearance to vegetation and other exterior combustibles such as mulch is 36î as mea- sured from the center of the outlet or cap. This 36î radius continues to grade or a minimum of 7 feet below the outlet.

1Certain Canadian and or Local codes or regu- lations may require different clearances.

2A vent shall not terminate directly above a side- walk or paved driveway which is located between two single †family dwellings and serves both dwell- ings.

3Only permitted if veranda, porch, deck, or bal- cony is fully open on a minimum of 2 sides beneath the floor.

NOTE: Where passage through a wall, or partition of combustible construction is desired, the installation shall conform to CAN/CSA-B365. (if in Canada)

Inside Corner

Detail

Fixed
Closed	Openable	Fixed
O p e n a b l e		Closed
O p e n a b l e

= Vent terminal	A = Air supply inlet	= Area where terminal is not permitted
	6

P61-2 specifications

The Harman Stove Company P61-2 is a premier pellet stove that stands out for its blend of efficiency, convenience, and advanced technology. Designed for both aesthetics and functionality, the P61-2 offers homeowners an exceptional heating solution for their living spaces.

One of the standout features of the P61-2 is its robust heating capability. This stove can produce an impressive heat output of up to 50,000 BTUs, effectively warming spaces up to 2,500 square feet. This makes it ideal for larger rooms or open floor plans, ensuring that the ambient temperature remains comfortable even on the coldest winter nights.

The P61-2 is designed with an innovative hopper capacity of 60 pounds, allowing for extended burn times of up to 24 hours on a single fill. This feature significantly reduces the frequency of refueling, making it an incredibly user-friendly option. The stove's automated feed system further enhances convenience by regulating the flow of pellets according to the heat setting, ensuring a consistent and efficient burn.

Another defining characteristic of the P61-2 is its advanced control system. Featuring a digital thermostat, users can easily set and adjust temperatures, providing a seamless heating experience. The stove also includes a programmable timer, allowing homeowners to schedule heating cycles according to their needs, ensuring warmth is on when it's needed most.

In terms of design, the P61-2 boasts a modern aesthetic that can complement various home interiors. It is available in multiple finishes, including classic black, providing a touch of elegance alongside powerful heating performance. The large viewing window allows users to enjoy the mesmerizing flames while benefiting from the stove's efficient heating capabilities.

The P61-2 also emphasizes environmentally conscious heating. It meets stringent EPA standards with low emissions, making it a cleaner alternative to traditional wood-burning stoves. This not only benefits the environment but also contributes to better indoor air quality.

Additionally, the Harman Stove Company has integrated user-friendly features such as a self-cleaning firepot and easy access to components for maintenance. This ensures that keeping the P61-2 in optimal condition is a straightforward process.

In conclusion, the Harman Stove Company P61-2 is a technologically advanced, efficient, and stylish pellet stove that masterfully combines performance with practicality. Whether for its powerful heating capabilities, user-friendly controls, or modern aesthetics, the P61-2 remains a top choice for those seeking a reliable and effective heating solution for their homes.