Trouble-Shooting, Cleaning Burn Pot | Harman Stove Company P61-2

Trouble-Shooting

FEEDER DOES NOT FEED

1.No pellets in hopper.

2.Feed motor will not run until ESP senses 165 deg. F. Maybe you did not put enough pellets in the burn pot before lighting the fire.

3.Feed motor has failed.

4.Something is restricting flow in the hopper or causing the slide plate to stick.

5.Firebox draft may be too low for low draft pressure switch in feeder circuit to operate. Check for closed doors, loose or missing gas- ket on doors or hopper lid, faulty pressure switch.

PARTIALLY BURNED PELLETS

1.Feed rate too high.

2.Draft too low. (Check burn pot clean- out slide and door gasket).

3.Burn pot or heat exchanger tubes may need to be cleaned.

4.Combination of all the above.

SMOKE SMELL

Seal the vent pipe joints and connection to stove with silicone.

FIRE HAS GONE OUT

1.No pellets in hopper.

2.Feed rate too low.

3.Something is restricting fuel flow.

4.Feed motor or draft motor has failed.

5.Power failure or blown fuse.

SMOKE IS VISIBLE COMING OUT OF VENT

1.Air-fuel ratio is too rich.

A.Feed rate too high.

B.Draft too low caused by a gasket leak.

LOW HEAT OUTPUT

1.Feed rate too low

2.Draft too low because of gasket leak.

3.Poor quality or damp pellets

4.Combination of 1. and 2.

Helpful Hints

Cleaning Burn Pot

Whenever your stove is not burning, take the opportunity to scrape the burn pot to remove carbon buildup. A vacuum cleaner is handy to remove the residue. Be sure the stove is cold if you use a vacuum.

Carbon buildup can be scraped loose with the fire burning using the special tool provided with your stove. Scrape the floor and sides of the burn pot. The carbon will be pushed out by the incoming fuel. Always wear gloves to do this.

Removing Ashes

Turn the Stove Temp Dial to number 1 approxi- mately 30 minutes before removing ashes. This will result in a cooler stove and ash pan.

Maximum Turbo settings are not needed in most cases. Operating in the normal range is rec- ommended when maximum heat output is not re- quired. The ESP probe prevents the stove from be- ing over-fired.

Keep the stove free of dust and dirt.

Fuel

Pellet fuels are put into 3 categories in terms of ash content. Premium at 1% or less, Standard at 3% or less and all others at 3% or more.

The P61 is capable of burning all 3 categories of pellets due to a patented feeder and burn pot system.

It should be noted, however, that higher ash content will require more frequent ash removal and may provide less BTU's per lb. Normally, standard and high ash pellets cost less than premium pellets and can be cost effective when burned in the P61.

The moisture content must not exceed 8%. Higher moisture will rob BTU's and may not burn properly.

P61-2 specifications

The Harman Stove Company P61-2 is a premier pellet stove that stands out for its blend of efficiency, convenience, and advanced technology. Designed for both aesthetics and functionality, the P61-2 offers homeowners an exceptional heating solution for their living spaces.

One of the standout features of the P61-2 is its robust heating capability. This stove can produce an impressive heat output of up to 50,000 BTUs, effectively warming spaces up to 2,500 square feet. This makes it ideal for larger rooms or open floor plans, ensuring that the ambient temperature remains comfortable even on the coldest winter nights.

The P61-2 is designed with an innovative hopper capacity of 60 pounds, allowing for extended burn times of up to 24 hours on a single fill. This feature significantly reduces the frequency of refueling, making it an incredibly user-friendly option. The stove's automated feed system further enhances convenience by regulating the flow of pellets according to the heat setting, ensuring a consistent and efficient burn.

Another defining characteristic of the P61-2 is its advanced control system. Featuring a digital thermostat, users can easily set and adjust temperatures, providing a seamless heating experience. The stove also includes a programmable timer, allowing homeowners to schedule heating cycles according to their needs, ensuring warmth is on when it's needed most.

In terms of design, the P61-2 boasts a modern aesthetic that can complement various home interiors. It is available in multiple finishes, including classic black, providing a touch of elegance alongside powerful heating performance. The large viewing window allows users to enjoy the mesmerizing flames while benefiting from the stove's efficient heating capabilities.

The P61-2 also emphasizes environmentally conscious heating. It meets stringent EPA standards with low emissions, making it a cleaner alternative to traditional wood-burning stoves. This not only benefits the environment but also contributes to better indoor air quality.

Additionally, the Harman Stove Company has integrated user-friendly features such as a self-cleaning firepot and easy access to components for maintenance. This ensures that keeping the P61-2 in optimal condition is a straightforward process.

In conclusion, the Harman Stove Company P61-2 is a technologically advanced, efficient, and stylish pellet stove that masterfully combines performance with practicality. Whether for its powerful heating capabilities, user-friendly controls, or modern aesthetics, the P61-2 remains a top choice for those seeking a reliable and effective heating solution for their homes.