Amana ACF422GA, ACF4225A Features, Hour automatic cancel, Oven temperature control adjustment

Page 10

Features

¸

F-

 

code

Possible Meaning

 

 

F1

Control failure

 

 

F2

Oven over temperature

 

 

F3

Sensor open or shorted

 

 

F9

Door latch circuit failure

 

 

DOOR

Door has not latched.

 

 

12-hour automatic cancel

This safety feature prevents oven from continuing to operate if it has been left on for over 12 hours. If a cooking function continues longer than 12 hours without any options on oven control being touched, this feature turns oven off. Any time an option is touched, 12-hour automatic cancel is reset.

Oven temperature control adjustment

Your range is calibrated at the factory for proper temperature. Due to individual variances and preferences, it may be necessary to adjust oven once it has been installed.

When first using the oven, follow recipe times and temperatures. Before adjusting oven baking temperature, test a recipe, such as ready-to-bake biscuits, by setting oven temperature higher or lower than the suggested temperature. The baking results should help you to decide how much of a temperature adjustment is required.

An accurate digital thermometer is necessary to calibrate the oven. Store purchased oven thermometers do not accurately measure oven temperature. Oven temperature can be increased or decreased by 35 °F. To avoid over adjusting the oven, only adjust the temperature by 5 °F each time.

NOTE: Remove aluminum foil from racks and oven bottom as this will alter oven performance. Check for blocked heat vents. If it still appears oven is not performing as expected, a calibration may be done.

1.Turn oven temperature knob to OFF.

2.Press and hold both arrow pads for approximately 5 seconds.

3.A double digit will display ranging from -35 °F to 35 °F.

4.Immediately, press either:

• to increase oven temperature by 5 °F

• to decrease oven temperature by 5 °F

•When temperature is adjusted to a cooler setting, a minus sign (-) will display with the offset temperature.

5.When desired temperature change is displayed, release control and change will be automatically saved after a few seconds. Control will return to time of day display.

•Offset temperature change will be retained through a power failure.

Service codes and tones

Electronic oven control is equipped with a self-diagnostic system. Self-diagnostic system alerts you if there is an error or problem with the unit. If electronic range control sounds a series of short, rapid beeps for over

16 seconds and the display shows an F-code, record F-code shown. Some F-codes can be cleared by disconnecting power to the range for approximately 3 minutes. If the code continues to reoccur disconnect electrical supply to range and contact an authorized servicer.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Contents Electric Smoothtop RangeRefer to Questions on cooking, cleaning or usage?Thank you for buying an Amana Range Call Consumer Affairs atImportant Safety Information Important Safety Information contd ALL AppliancesSurface Element Fire PrecautionsCase of Fire Oven FiresCooking on the Smoothtop Setting Surface Element ControlsIndicator Lights After you cookFlat Pan Test Cookware SuggestionsWhat Should You Consider in Cookware? Can I can?Broiling Hints Oven Cooking MethodsOven Cooking Methods BakeAluminum Foil Before Using the OvenOven Racks and Rack Positions Rack Position Guidelines for Baking, Roasting and BraisingOven temperature control adjustment FeaturesHour automatic cancel Service codes and tonesPreheat Signal Display and SignalsTimer Signal End-of-Cycle SignalSetting Minute Timer Using the Oven ControlSetting Electronic Clock Resetting and Canceling TimerBaking Using the Oven Control cont’dHow High or Low Can I Set the Temperature? PreheatingHow much time is left? Delayed BakingHow Far Ahead Can I Set the Time? Timed BakingClean excess spills before starting a self-clean cycle Self-cleaningInterrupting the self-clean cycle Do I need to prepare?Delayed Self-clean Cycle Hints for Cookies CookingBaking Guidelines CakesTest your cakes for doneness Common Baking ProblemsCooking cont’d It may not be the ovenMeat Basics Using a Meat ThermometerHandling Hints Cooking Tips Storage Safety TenderizingBroiling Guidelines BeefPork Roasting GuidelinesBeef LambBraising Guidelines Removing Oven Door Care and CleaningCleaning Oven Door Replacing Oven DoorReplacing Oven Light Care and Cleaning cont’dPart General Directions Problem Cause Removal Caring for the smoothtopFor best cleaning results Cleaning Stainless SteelCan I use liquid cleaners on my stainless steel? Or call Consumer Affairs atTroubleshooting Topic Possible Cause SolutionTroubleshooting cont’d AppearancePage Page Page Amana Warranty Limited Warranty
Related manuals
Manual 28 pages 48.42 Kb

DCF4205, ACF422GA, ACF4215A, ACF4225A, ACF4205A specifications

The Amana ACF4205A, ACF4215A, and DCF4205 are state-of-the-art cooking appliances designed to elevate culinary experiences in both residential and commercial kitchens. Each model is engineered with a blend of innovative features, technologies, and user-friendly characteristics, making them ideal choices for cooking enthusiasts and busy professionals alike.

The ACF4205A and ACF4215A are advanced combination microwaves that offer versatility in cooking methods. These models utilize the unique combination of microwave energy and convection heat, allowing users to achieve perfectly cooked meals in a fraction of the time compared to conventional ovens. The microwave's adjustable power levels ensure consistent results, while the convection option browns and crisps dishes to perfection. With multiple cooking presets, users can select the ideal settings for a variety of foods, simplifying meal preparation.

Both ACF models feature a spacious interior with easy-to-clean surfaces, making it convenient for busy kitchens. The sleek, modern design integrates seamlessly into any kitchen décor, and the intuitive control panel allows even novice cooks to operate the appliances with ease. Moreover, the models are equipped with a durable glass turntable that promotes even cooking by ensuring food rotates consistently.

On the other hand, the DCF4205 is a dedicated countertop fryer, designed for those who enjoy fried food but desire healthier cooking options. With advanced heating technology and efficient oil circulation, this fryer ensures that meals come out crispy and delicious without excessive oil absorption. The adjustable temperature control allows users to fry, sauté, or even bake at precise temperatures, providing versatility beyond standard frying.

Safety is paramount in these Amana models, which come equipped with features like automatic shut-off and cool-touch exteriors, ensuring a worry-free cooking experience. The removable components facilitate easy cleaning and maintenance, ensuring that the appliances remain in top condition for years.

In summary, the Amana ACF4205A, ACF4215A, and DCF4205 are designed with modern culinary needs in mind, combining innovative cooking technologies with user-friendly features. Whether for microwave cooking, baking, or frying, these appliances are equipped to deliver exceptional results, making them an essential addition to any kitchen. With their stylish designs and practical functionalities, Amana guarantees satisfaction for professional chefs and home cooks alike.
Top Page Image Contents