Amana DCF4205, ACF422GA Using the Oven Control, Flashing Display, Setting Electronic Clock

Using the Oven Control

Flashing Display

When power is connected

or interrupted, oven display flashes. Press CLOCK to reset display. Clock may need to be reset.

Making the Numbers Increase at a Faster Rate

Time increases in larger increments

the longer the + or pad is held.

Timer Signal

When time elapses, beep will sound. Press TIMER ON/OFF pad to stop timer and return to clock display.

Setting Electronic Clock

The 12 hour clock does not display AM, PM or military time. When power is connected or restored, display flashes until

RECALL OVEN TEMP/CLOCK pad is pressed or temperature knob is turned.

1.	Press RECALL OVEN TEMP/CLOCK pad.
2.	Press + or pads until correct time-of-day
	displays.
3.	Time is locked in after 5 seconds of no adjustment.

Setting Minute Timer

The timer is a timer only. Electronic timer does not control bake, broil or self-clean function. Timer can be set up to 11 hours and 59 minutes.

1.Press TIMER ON/OFF pad.

2.Press + orpad until desired amount of time displays.

•Time increases in 1 minute and 10 minute increments.

• Timer begins counting down automatically after time is entered.

• To view clock while timer counts down, press RECALL OVEN TEMP/CLOCK pad. Timer will return after 3 seconds of no input.

3.Press and hold TIMER ON/OFF pad to cancel timer signal.

• After time elapses, timer beeps a single, three second tone.

Resetting and Canceling Timer

To reset the time when remaining time is displayed, press TIMER ON/OFF pad, then + orpad until new time displays. To cancel timer when remaining time is displayed or when signal is beeping, press and hold TIMER ON/OFF pad.

12