Avalon Stoves Arbor PS manual Check Ashpan, Dispose if necessary, Clean the Glass

Page 33

Maintenance3 3

Bi-Weekly Maintenance (or every 10 bags of pellets) - continued

Check Ashpan, Dispose if necessary

WARNING: Make sure the heater has fully cooled (approximately 25 minutes) before conducting service.

WARNING: The ashpan must be in place while the heater is in use.

Lift up on the ashlip and slide the ashpan forward.

Twist the ashpan handle clockwise.

A handle is provided on the ashpan to remove the ashes.

Disposal of Ashes – Ashes should be placed in a metal container with a tight fitting lid. The closed container of ashes should be placed on a noncombustible floor or on the ground, well away from all combustible materials, pending final disposal. If the ashes are disposed of by burial in soil or otherwise locally dispersed, they should be retained in the closed container until all cinders have been thoroughly cooled.

Clean the Glass

Open the doors and clean the glass with a non-abrasive glass cleaner and rag.

4070806

1 0 0 - 0 1 1 9 1 _ 0 0 0

Image 33

Contents Arbor Introduction Important Information 2IntroductionTravis Industries 0 0 1 1 9 1 0 0Table of Contents 4Safety Precautions Mobile Home Safety Precautions6Specifications Planning The Installation Installation OptionsStove Placement Before You BeginClearances Straight Installation InstallationClearances Corner Maximum Venting Distance Venting the Pellet StoveInstalling the Pellet Vent Pellet Vent TypePellet Vent Termination Outside Air used for combustion Mobile Home RequirementsBaffle Installation Alcove Installation RequirementsRestrictor Adjustment Door Seal VerificationRobertshaw Thermostat InstallationInstallation Example Direct Through-the-wall Installation Installation Example Interior Vertical Installation Installation Example Class a Chimney Retrofit Installation Example Masonry Fireplace Hearth Stove Vertical Cap Cover Plate non-combustible Storm Collar Vent Flex Section Installation Example Freestanding Masonry Chimney0Operation Safety NoticeLocation of Controls Starting the Heater for the First TimeOperation2 Loading PelletsTwo Modes of Operation To Adjust the Heat Manual Mode2Operation To StartTo Adjust Room Temperature or Start the Stove Auto Mode4Operation Adjusting the Fan SpeedPower Outages Fault LightStart-Up Sequence Manual Auger Button6Operation Using a Pellet/Corn Mix with This HeaterDaily Maintenance whenever using the stove Maintenance2Inspect the Burn Make Sure Pellets are Not Piling Up8Maintenance Cleaning the FirepotCheck Firepot for Clinkers Door Opening Bi-Weekly Maintenance or every 10 bags of pellets 0MaintenanceClean the Hopper Clean the Heat Exchange TubesClean the Baffles Maintenance3Sweep Ash Into Ashpan 2MaintenanceCheck Ashpan, Dispose if necessary Clean the Glass4Maintenance Yearly Maintenance or every two tonsClean the Vertical Exhaust Duct Maintenance3 Clean the Exhaust Blower 6MaintenanceClean the Vent Clean the Convection BlowerAdjusting the Door Hinge and Latch Check for Air Leaks Around the Door, Glass, and AshpanReplacement Parts Door Replacement PartsReplacement Parts Convection Fan Normal Operating SoundsSafety Label Years 1 & 2 Coverage Parts & Labor Limited 7 Year Warranty2Index

Arbor PS specifications

The Avalon Stoves Arbor PS stands out in the world of home heating solutions, combining advanced technology with exceptional design. This innovative wood stove is engineered to provide unmatched efficiency and style, making it a popular choice for homeowners looking to enhance both their comfort and aesthetic appeal.

One of the standout features of the Arbor PS is its powerful heating capacity. Designed to heat spaces of up to 2,000 square feet, it boasts impressive efficiency ratings that ensure optimal heat distribution, transforming cold living areas into warm, inviting spaces. Its ability to burn wood cleanly and efficiently means that homeowners can enjoy warmth without compromising air quality.

A key characteristic of the Arbor PS is its unique hybrid fuel technology. This technology allows for longer burn times and less frequent refueling, making it an incredibly convenient option. With a burn time of up to 12 hours, users can set their wood stove in the evening and wake up to residual warmth without the hassle of overnight maintenance.

The stove features an attractive, modern design, appealing to a wide range of decorating styles. Its sleek cast iron construction not only provides a rustic charm but also enhances durability, ensuring years of reliable performance. The large fire viewing window is another highlight, allowing users to appreciate the beauty of the flames while enjoying the heat it provides.

Safety is also a top priority with the Arbor PS. The stove is equipped with advanced safety features, including an airtight construction that minimizes the risk of air leaks and an adjustable air control for precise temperature regulation. Additionally, the stove’s high-efficiency design significantly reduces emissions, making it an eco-friendly option for environmentally conscious homeowners.

Installation is straightforward, thanks to the versatile flue outlet options which accommodate various setups. This flexibility, combined with the Arbor PS’s adaptability to both traditional and contemporary spaces, makes it a remarkable addition to any home.

In summary, the Avalon Stoves Arbor PS is a premier wood stove that excels in efficiency, aesthetics, and safety. It brings together cutting-edge technology and timeless design, making it an ideal choice for those seeking a reliable and stylish heating solution. With its combination of features, the Arbor PS is set to meet the demands of modern living while providing the comfort and charm that only a wood stove can offer.