Plasmon LF 8600 user manual Inspecting the LF, Repacking the LF

Page 26

INSPECTING THE LF 8600

The following items should be included in the LF 8600 carton:

•one LF 8600 with Bezel assembly (Tower comes completely assembled)

•one AC power cable

•one User Manual

•one combination manual baseplate/door lock release tool

•I/O cables (optional)

•terminators (optional)

The following optional items, if ordered, will have been shipped with the LF 8600 in separate cartons:

•LM 8000 Media Cartridges

•Rack Mount Installation Kit

•Blank Panel Kit

After unpacking the LF 8600, check for:

•damage to the chassis cover, chassis and bezel

•damage to connectors

•dislocated or broken controls and indicators

Report all discrepancies, missing items and damaged equipment to your supplier.

If condensation exists on the drive, allow the moisture to evaporate by exposing the LF 8600 to the operating environment for at least 6 hours before powering on the unit.

REPACKING THE LF 8600

The LF 8600 should be repacked using the original packing materials. Prior to packaging the LF 8600, close the baseplates as described in the next section. Repack the LF 8600 using the following procedure.

CAUTION

Shipping the LF 8600 without closing the baseplates may result in damage to the drive which is not covered under warranty.

PLASMON L M S - LF 8600 USER MANUAL Page 26

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Plasmon 8000 Series Page Page Page Agency Compliance and Approval Page Table of Contents Appendix a Scope Related PublicationsPage General Description Page Drive Characteristics Front Panel Rear PanelDimensions and Weight Shipping WeightTEMPERATURE, Humidity and Altitude TransitMedia Environmental Characteristics Shock and VibrationPower Supply OUT-OF-RANGE Protection Features AC Power RequirementsAC Power Cord AC GroundParticulate Limits Tilt RangeHeat Dissipation Page Unpacking the Tower Configuration Unpacking and Repacking InstructionsLF 8600 Tower Packing Caster for the LF 8600 Tower Unpacking the Rack Mount Configuration LF 8600 Rack Mount Packing Inspecting the LF Repacking the LFClosing the Baseplates Manually Closing the Drives BaseplatesRepacking the Tower Configuration Repacking the Rack Mount Configuration Moving the Shuttle Assembly to the Shipping PositionPage Installation DE-INSTALLATION Installation RequirementsTower Installation Rack Mount Installation LF 8600 Rack Mount KitLF 8600 Side-by-Side Rack Mount Page Mounting the Platform Support Rack Mounting the Slide Assembly to the Platform Support Rack Extending the Slide Platform Assembly Securing the Platform to the Slide Assembly Do Not Extend Both Drives Simultaneously Mounting the LF 8600 Chassis to the Extended Platform LF 8600 Rack Mount Slide Detail Standard Rack Mounted LF 8600 in the Retention Lock Position Installing the Lateral Support Angle Installing the Cabinet Trim Panel Scsi BUS Considerations Host-to-LF 8600 Daisy Chain Cable ConnectionsLF 8600-to-Host Cable Connection Connecting Power and Scsi Cables Connecting the Power CordConnecting Multiple Devices Multiple LF 8600 Scsi Interface Cable ConnectionsConnecting a Single Device Connector Verification Rack Mount Configuration DE-INSTALLATIONLF 8600 Slide Release Location Vertical Tail Page Controls and Indicators Operating InstructionsPOWER-ON Procedure LF 8600 AC Power Switch PositionsOperating Mode Modes of OperationLF 8600 DOC Operating Mode Messages Configuration Mode Viewing the configuration View ConfigPage Main Menu Viewing the Configuration View Config View Configuration MessagesView Config Menu Set Configuration menu Set Config Menu Part CDE Curs SET Defaults Setting the Scsi IDSetting the BUS Parity Checking Setting the LanguageSetting the Write Protect Option Setting the Media Autoload OptionSetting the Load Switch Option Setting the Read Ahead OptionSetting the CDE Curs Option Setting the Busy Option Setting the Modsel RA OptionSetting the MM Spinup Option Select Target NegotiationClear NvRAM Diagnostics Selftests Clear Rtpm Diagnostics Menu Part Diagnostic Menu Part SET the Internal Drive Serial Number SET Serial # Set Serial # Menu Test Mode To perform any of the diagnostic testMedia Cartridge Handling Side a ViewPage Setting the Write Protection Switch Manually Write Protecting the Media CartridgeAffixing Labels Media Insertion and RemovalLF 8600 Media Access Cartridge Insertion Data Cartridge InsertionCartridge Removal LM 8000 Cartridge RemovalManual Cartridge Release Mechanism Opening the BaseplatesRemoving the Bezel Manually Overriding the Door LockBezel Removal Retracting the Cartridge LF 8600 Manual Cartridge RetractionMedia Loading Page Operator Maintenance Inspecting and Cleaning FAN and Blower FiltersReplacing Fuses Removing Filter ElementRemoving Fuse from AC Power Receptacle Rear View of LF Media Cleaning Media Cleaning Using Cleaning KIT P/NTEMPERATUR, Luftfeuchtigkeit UND Seehöhe German TRANSLATIONS/ÜBERSETZUNGEN INS DeutscheAbmessungen UND Gewicht Bedingung Betrieb Ruhe Lagerung Transport Stoss UND Vibration WechselstrombedarfWärmeausstrahlung WechselstromerdungKipptoleranz Grenzwerte FÜR DIE StaubkonzentrationWarnung Auspachen DES LF6600Wiederverpacken DES LF Einsetzung Erforderis Turmmontage ANSCHLUß DES Netzkabels Anschlussüberprüfung Abbau DER GestellmontagenkonfigurationEinstellen DIE Device ID Hinweis Handhabung VON Datenträgerkassetten Auswechseln VON Sicherungen Warnung Vorsicht Storing More Of Your Digital World . Permanently

LF 8600 specifications

The Plasmon LF 8600 is an advanced optical disc archival system designed for long-term data storage and retrieval. It is part of a broader range of Plasmon products aimed at meeting the growing demand for secure and reliable data preservation in various industries, including healthcare, finance, and government. This system is particularly renowned for its efficiency, scalability, and innovative technology.

One of the main features of the Plasmon LF 8600 is its ability to handle large volumes of data. With a capacity of up to 30 terabytes in a single library, the LF 8600 is capable of storing an extensive amount of information, making it ideal for organizations that require long-term data retention. The high storage density ensures that users can archive vast amounts of data without taking up significant physical space.

The LF 8600 utilizes a high-speed optical technology, allowing for rapid data access and retrieval. It employs a unique dual-stage optical read/write mechanism that enhances performance, offering fast transfer rates of up to 1.6 GB/minute. This level of efficiency minimizes downtime and allows users to access their critical data quickly, which is essential for operation in fast-paced environments.

In terms of reliability, the Plasmon LF 8600 is built for durability. The system uses high-quality optical discs that provide exceptional resistance to data degradation and environmental factors. These discs are designed to last for decades, ensuring that the stored data remains intact and accessible throughout their lifespan.

The LF 8600 also features a robust software management interface, enabling users to seamlessly manage their archived data. This software supports automated data migration and archival processes, reducing the risk of human error. Additionally, the interface allows for straightforward indexing and searching of stored files, simplifying data retrieval when required.

Security is a top priority for the LF 8600 system. It includes various features such as user authentication, data encryption, and compliance with industry standards, ensuring that sensitive information remains protected against unauthorized access.

Overall, the Plasmon LF 8600 represents a significant advancement in optical archiving technology. With its high capacity, fast data access, reliability, and strong security features, the LF 8600 is an excellent choice for organizations looking to invest in a long-term data storage solution that can efficiently meet their evolving needs.
Top Page Image Contents