Plasmon LF 8600 user manual Setting the Write Protect Option, Setting the Media Autoload Option

Page 69

SETTING THE WRITE PROTECT OPTION

The write protect option enables the user to inhibit the LF 8600 from writing to any media inserted into the drive, regardless of the write protect setting on the media cartridges.

Perform the following procedure to turn write protect on or off:

1.Enter the Configuration mode by pressing both the LOAD/MENU and TEST/SELECT switches simultaneously.

2.Press the MENU switch until "Set Config" is displayed.

3.Press the SELECT switch to enter the Set Configuration menu.

4.Press the MENU switch until "Wrt Prot:" is displayed.

5.Press the SELECT switch to scroll through the states for write protect (off, on). When the desired state is displayed, press MENU to enter the state and move to the next option in the Set Configuration menu.

6.Simultaneously press the LOAD/MENU and TEST/SELECT switches to move up to the Main menu. Simultaneously press the LOAD/MENU and TEST/SELECT switches again to exit Configuration mode.

NOTE

The Write Protect indicator on the DOC is illuminated when write protect is enabled.

SETTING THE MEDIA AUTOLOAD OPTION

The media AutoLoad load option enables a user to choose which media cartridge is automatically inserted and loaded at power up and whenever the LOAD/MENU switch is pressed while in the Operating mode. The factory default selects the cartridge in slot 1. The options are 1 - 6 or Most Recently Used (MRU).

Perform the following procedure to set the LF 8600's AutoSpin option:

1.Enter the Configuration mode by pressing both the LOAD/MENU and TEST/SELECT switches simultaneously.

2.Press the MENU switch until "Set Config" is displayed.

3.Press the SELECT switch to enter the Set Configuration menu.

4.Press the MENU switch until "AutoLoad:" is displayed.

5.Press the SELECT switch to scroll through the Auto Load options. The drive can be configured to load the cartridge residing in a specific slot 0 - 6 or the Most Recently Used (MRU) cartridge. When the desired option is displayed, press the MENU switch to enable that option and select the next option in the Set Configuration menu.

6.Simultaneously press the LOAD/MENU and TEST/SELECT switches to move up to the Main menu. Simultaneously press the LOAD/MENU and TEST/SELECT switches again to exit Configuration mode.

97663032 A Page 69

Page 68 Page 70
Image 69
Page 68 Page 70
Contents Plasmon 8000 Series Page Page Page Agency Compliance and Approval Page Table of Contents Appendix a Related Publications ScopePage General Description Page Drive Characteristics Rear Panel Front PanelShipping Weight Dimensions and WeightTransit TEMPERATURE, Humidity and AltitudeShock and Vibration Media Environmental CharacteristicsAC Power Cord AC Power RequirementsPower Supply OUT-OF-RANGE Protection Features AC GroundTilt Range Heat DissipationParticulate Limits Page Unpacking and Repacking Instructions Unpacking the Tower ConfigurationLF 8600 Tower Packing Caster for the LF 8600 Tower Unpacking the Rack Mount Configuration LF 8600 Rack Mount Packing Repacking the LF Inspecting the LFManually Closing the Drives Baseplates Closing the BaseplatesRepacking the Tower Configuration Moving the Shuttle Assembly to the Shipping Position Repacking the Rack Mount ConfigurationPage Installation Requirements Installation DE-INSTALLATIONTower Installation LF 8600 Rack Mount Kit Rack Mount InstallationLF 8600 Side-by-Side Rack Mount Page Mounting the Platform Support Rack Mounting the Slide Assembly to the Platform Support Rack Extending the Slide Platform Assembly Securing the Platform to the Slide Assembly Do Not Extend Both Drives Simultaneously Mounting the LF 8600 Chassis to the Extended Platform LF 8600 Rack Mount Slide Detail Standard Rack Mounted LF 8600 in the Retention Lock Position Installing the Lateral Support Angle Installing the Cabinet Trim Panel Host-to-LF 8600 Daisy Chain Cable Connections Scsi BUS ConsiderationsLF 8600-to-Host Cable Connection Connecting the Power Cord Connecting Power and Scsi CablesMultiple LF 8600 Scsi Interface Cable Connections Connecting Multiple DevicesConnecting a Single Device Rack Mount Configuration DE-INSTALLATION Connector VerificationLF 8600 Slide Release Location Vertical Tail Page Operating Instructions Controls and IndicatorsLF 8600 AC Power Switch Positions POWER-ON ProcedureModes of Operation Operating ModeLF 8600 DOC Operating Mode Messages Viewing the configuration View Config Configuration ModePage Main Menu View Configuration Messages Viewing the Configuration View ConfigView Config Menu Set Configuration menu Set Config Menu Part CDE Curs Setting the Scsi ID SET DefaultsSetting the Language Setting the BUS Parity CheckingSetting the Media Autoload Option Setting the Write Protect OptionSetting the Read Ahead Option Setting the Load Switch OptionSetting the CDE Curs Option Setting the Modsel RA Option Setting the Busy OptionSelect Target Negotiation Setting the MM Spinup OptionClear NvRAM Diagnostics Selftests Clear Rtpm Diagnostics Menu Part Diagnostic Menu Part SET the Internal Drive Serial Number SET Serial # Set Serial # Menu To perform any of the diagnostic test Test ModeSide a View Media Cartridge HandlingPage Manually Write Protecting the Media Cartridge Setting the Write Protection SwitchMedia Insertion and Removal Affixing LabelsLF 8600 Media Access Data Cartridge Insertion Cartridge InsertionLM 8000 Cartridge Removal Cartridge RemovalOpening the Baseplates Manual Cartridge Release MechanismManually Overriding the Door Lock Removing the BezelBezel Removal LF 8600 Manual Cartridge Retraction Retracting the CartridgeMedia Loading Page Inspecting and Cleaning FAN and Blower Filters Operator MaintenanceRemoving Filter Element Replacing FusesRemoving Fuse from AC Power Receptacle Rear View of LF Media Cleaning Using Cleaning KIT P/N Media CleaningGerman TRANSLATIONS/ÜBERSETZUNGEN INS Deutsche Abmessungen UND GewichtTEMPERATUR, Luftfeuchtigkeit UND Seehöhe Bedingung Betrieb Ruhe Lagerung Transport Wechselstrombedarf Stoss UND VibrationKipptoleranz WechselstromerdungWärmeausstrahlung Grenzwerte FÜR DIE StaubkonzentrationAuspachen DES LF6600 Wiederverpacken DES LFWarnung Einsetzung Erforderis Turmmontage ANSCHLUß DES Netzkabels Abbau DER Gestellmontagenkonfiguration AnschlussüberprüfungEinstellen DIE Device ID Hinweis Handhabung VON Datenträgerkassetten Auswechseln VON Sicherungen Warnung Vorsicht Storing More Of Your Digital World . Permanently

LF 8600 specifications

The Plasmon LF 8600 is an advanced optical disc archival system designed for long-term data storage and retrieval. It is part of a broader range of Plasmon products aimed at meeting the growing demand for secure and reliable data preservation in various industries, including healthcare, finance, and government. This system is particularly renowned for its efficiency, scalability, and innovative technology.

One of the main features of the Plasmon LF 8600 is its ability to handle large volumes of data. With a capacity of up to 30 terabytes in a single library, the LF 8600 is capable of storing an extensive amount of information, making it ideal for organizations that require long-term data retention. The high storage density ensures that users can archive vast amounts of data without taking up significant physical space.

The LF 8600 utilizes a high-speed optical technology, allowing for rapid data access and retrieval. It employs a unique dual-stage optical read/write mechanism that enhances performance, offering fast transfer rates of up to 1.6 GB/minute. This level of efficiency minimizes downtime and allows users to access their critical data quickly, which is essential for operation in fast-paced environments.

In terms of reliability, the Plasmon LF 8600 is built for durability. The system uses high-quality optical discs that provide exceptional resistance to data degradation and environmental factors. These discs are designed to last for decades, ensuring that the stored data remains intact and accessible throughout their lifespan.

The LF 8600 also features a robust software management interface, enabling users to seamlessly manage their archived data. This software supports automated data migration and archival processes, reducing the risk of human error. Additionally, the interface allows for straightforward indexing and searching of stored files, simplifying data retrieval when required.

Security is a top priority for the LF 8600 system. It includes various features such as user authentication, data encryption, and compliance with industry standards, ensuring that sensitive information remains protected against unauthorized access.

Overall, the Plasmon LF 8600 represents a significant advancement in optical archiving technology. With its high capacity, fast data access, reliability, and strong security features, the LF 8600 is an excellent choice for organizations looking to invest in a long-term data storage solution that can efficiently meet their evolving needs.
Top Page Image Contents