Installation | Black Box VDSL2 PoE Ethernet Extener Kid, PD instruction

Chapter 3: Installation

3. Installation

Because the VDSL2 PoE Ethernet Extenders are preconfigured for basic applications, you can install them quickly. Follow these steps:

1.Connect the line interface between the units with RJ-11 cable.

2.Connect the Standard Extender to a twisted-pair Ethernet connection. Connect the PD Extender to a PoE PSE switch or other PSE device using copper twisted-pair cable.

NOTE: Make sure that the PSE device is turned on, or the VDSL2 PoE Ethernet Extender (PD) will not work.

3.Connect the power adapter to the Standard extender and plug it in.

NOTE: The interconnecting cables should be rated for external use and appropriate for the application’s voltage, current, anticipated temperature, flammability, and mechanical serviceability.

Table 3-1 shows the data rate and transmission distance information via 26 AWG at 6 dB.

Table 3-1. Supported data rates and transmission distances.

Downstream	Upstream	Distance
Data Rate (Mbps)	Data Rate (Mbps)	(feet)

100	60	500

98	53	1000
90	44	1250

80	36	1500

70	27	1750
60	18	2000

48	11	2500

39	8	3000
35	3.5	3500

28	0.3	4000

NOTE: Depending on your application, you might need to change the DIP switches for optimum performance.

Page 11