Step 8: Assemble the lock parts

FULL OVERLAY PANEL INSTALLATION INSTRUCTIONS

Step 8: Assemble the lock parts

Two (2) lock extensions are supplied with the lock. Use the longer extension for a 34" thick overlay panel and the shorter one for a 58" thick panel. Assemble the lock exten- sion, cam stop washer, spring washer, and set screw to the lock as shown in Figure 9 and 10.

Install this assembly into the overlay panel and secure with the retaining nut using a 15mm socket. Make sure the key slot in the lock is vertical.

Top hinge pin

Top door hinge adapter

Top hinge adapter bushing

Top hinge

Step 9: Secure overlay panel to the door.

With the #10 wood screws provided, fasten the overlay panel to the door. (See Figure 12).

Step 10: Install lock cam (Models with locks only).

Attach the lock cam to the back of the lock assembly with the phillips head machine screw provided. Orient the lock cam vertically when installing on the lock.

Step 11: Install door gasket

Press the door gasket into the door channel. Make certain the gasket corners are fully inserted. If applicable insert the key into the lock and make certain the lock operates properly.

Bottom door hinge adapter

Bottom hinge adapter bushing

Bottom hinge cam

Bottom hinge pin

Step 9: Secure overlay panel to the door. Bottom hinge

Step 12: Install the door

Install the top and bottom hinge adapter bushings back into the hinge adapters that were removed in step 6. Install the door by reversing the procedure from step 2. Install the top hinge pin so the screw head is flush with the top surface of the hinge. If applicable insert key into lock and verify the lock cam works properly with the catch bracket on the front of the refrigerator cabinet.

BRASS EXTENSION

 

SPRING WASHER

 

NUT

CAM

LOCK

 

 

PHILLIPS SCREW

15/32 HOLE

 

13/16 COUNTER

 

BORE 7/16 DEEP

 

 

INNER

 

DOOR

3/4 INCH

 

WOOD PANEL

 

 

SECTION A-A

 

SCALE 1 : 1

Figure 10

Clearance hole through door gasket channel

#10 Wood Screw

Back of doorStep 10: Install lock cam (Models with locks only).

Figure 11

Right hand

hinges shown

Figure 12

19

Page 19
Image 19
Marvel Industries 61ARMBBOL manual Assemble the lock parts, Secure overlay panel to the door, Install door gasket