Troubleshooting, Fan doesn’t work | Casablanca Fan Company 59090

Troubleshooting

www.CasablancaFanCo.com 1.888.227.2178

Fan doesn’t work

•Press a fan speed button (1-4).

•Check the circuit breaker to ensure the power is turned on.

•Check the wall control battery.

•Make sure that you have paired the wall control.

•Make sure the blades spin freely.

•Turn off power from the circuit breaker, then loosen the canopy and check all the connections according to the wiring diagram on pages 9-10.

Excessive wobbling

•Tighten all of the blade screws until they are snug.

•Turn the power off, support the fan carefully, and check that the hanger ball is properly seated.

•Use the provided balancing kit and instructions to balance the fan.

Remote doesn’t work

•Install a fresh battery in the wall control.

•Make sure you have paired the remote.

Noisy Operation

•Tighten the blade and blade iron screws until they are snug.

•Check to see if any of the blades are cracked. If so, replace all of the blades.

If you have multiple remotes or multiple remote-controlled fans installed on the same circuit breaker and you are experiencing interference or faulty operation of your remote controls, please go to www.CasablancaFanCo.com/FAQs and click “How do I properly install multiple remote-controlled fans?” for information on how to correct this issue.

AUTHORIZED SERVICE

CENTERS

For the most updated list of

Casablanca Authorized Service

Centers, visit