HP and 8150 MFP manual Problem Solving 299 PS Troubleshooting

Chapter 5 Problem Solving 299

PS Troubleshooting (continued)

Situation	Solution
A page prints with	If the page margins are clipped, you may have to print the
clipped margins.	page at 300-dpi resolution or install more memory. Also try
	turning off Resource Saving and I/O Buffering.

A page fails to print.

Set PRINT PS ERRORS=ON, and then send the job again to print a PS error page. If this does not identify the problem, try turning off Resource Saving and I/O Buffering or installing more memory. (See page 318 for more information about PS printing.)

A PS error page prints. ! Make sure the print job is a PS job.

!Check to see whether your software expected you to send a setup or PS header file to the printer.

!Check the printer setup in your software application to make sure that the printer is selected.

!Check cable connections to ensure that they are secure.

!Reduce the complexity of the graphic.

!Add available memory by turning on Resource Saving.

Correcting Output Quality Problems