HP and 8150 MFP manual Advanced Printing Tasks 161

Chapter 3 Advanced Printing Tasks 161

The user can change the variable fuser mode for each of these types of paper from the control panel. The following are the variable fuser modes:

Variable Fuser Mode	Temperature and Printing Speed for Letter and A4
NORMAL	Normal fuser temperature setting, 32 ppm
LOW	Low fuser temperature setting, 32 ppm
HIGH1	Raises fuser temperature setting, 32 ppm
HIGH2	Raises fuser temperature setting, 24 ppm
HIGH3	Raises fuser temperature setting, 16 ppm

Most paper types are set to NORMAL by default. The exceptions are:

!TRNSPRNCY=LOW

!LABELS=HIGH1

! CARDSTOCK=HIGH2

!ROUGH=HIGH1

Continued on next page.

Changing the Variable Fuser Mode