HP and 8150 MFP manual Problem Solving 289 Problems with the Optional 8-bin Mailbox

Chapter 5 Problem Solving 289

Problems with the Optional 8-bin Mailbox (continued)

SituationSolution

Paper is not going to the correct output bin.

!Verify that the correct output bin is selected in the printer driver. For more information on changing printer driver settings, see the online help.

!The paper does not meet the specifications for the output bin. See page 392 for more information on paper specifications.

!If you are trying to send print jobs to an optional multibin mailbox, verify that the multibin mailbox has been installed on the printer and in the printer driver. Also verify the multibin mailbox mode, which will affect the print job destination.

The multibin mailbox will ! Verify that the power cord is firmly plugged into both the

not power on.multibin mailbox and the power receptacle. Remove and

reconnect the power cord.

!Make sure that the cable from the multibin mailbox is plugged into the printer C-link connector. If not, turn the printer off, plug the cable into the C-link connector, then turn the printer back on. See page 292 for cabling configurations.

!Verify that the cables are firmly attached to the printer.

Correcting Output Quality Problems