HP and 8150 MFP manual Selecting the Stapler from the Control Panel, Printing Tasks 116

Chapter 2 Printing Tasks 116

Selecting the Stapler from the Control Panel

If your software does not support stapling, set it using the directions below.

1Press MENU repeatedly until PAPER HANDLING MENU appears.

2Press ITEM repeatedly until PAPER DEST= STANDARD OUTBIN * appears.

3Press + repeatedly until PAPER DEST= OPTIONAL BIN 6 appears. (See pages 109 and 110 to choose the appropriate bin according to the mode you are using.) Your network administrator may have changed the name of this bin. For example, it may be called STAPLER.

4Press SELECT to save your choice. An asterisk (*) appears next to your selection.

Using the Stapler