Maytag AGS1740BDQ, AGS1740BDW, 8113P592-60 Timer, Fault Codes, and Oven Door, Baking, To lock

Models: AGS1740BDQ, AGS1740BDW, 8113P592-60

1 20
Download 20 pages 60.86 Kb
Page 14
Image 14
To cancel the Clock display:

To cancel the Clock display:

If you do not want the time of day to display:

Press and hold the CANCEL and Clock

pads for three seconds. The time of day will CANCEL disappear from the display

When the clock display is canceled, press the Clock pad to briefly display the time of day.

To restore the Clock display:

Press and hold the CANCEL and Clock pads for three seconds. The time of day will reappear in the display.

Timer

The timer can be set from one minute (0:01) up to 99 hours and 59 minutes (99:59).

The timer can be used independently of any other oven activity. It can also be set while another oven function is operating.

The timer does not control the oven. It only controls a beeper.

To set the Timer:

1.

Press the Timer

pad.

Timer

 

,0:00 lights in the display.

 

 

, The colon flashes in the display.

2.

Press the More+

or Less= pad until the

correct time appears in the display.

Less-

 

, The colon will continue to flash.

 

. Press Timer pad again or wait four seconds.

 

,The colon continues flashing and the time begins counting down.

,The last minute of the timer countdown will be displayed as seconds.

4.At the end of the set time, one long beepwill sound.

To cancel the Timer:

1.Press and hold the Timer pad for three seconds.

OR

2.Press the Timer pad and set the time to 0:00.

To lock:

Press and hold the CANCEL and Cook &

Hold pads for three seconds. (Press

CANCEL pad first.)

,LOCK flashes in the display.

To unlock:

Press and hold the CANCEL and Cook & Hold pads for three seconds. (Press CANCEL pad first.)

,LOCK disappears from the display.

Fault Codes

BAKE or LOCK may flash rapidly in the display to alert you if there is an error or a problem. If BAKE or LOCK flash in the display, press CANCEL pad. If BAKE or LOCK continue to flash, disconnect power to the appliance. Wait a few minutes, and then reconnect power. If the flashing still continues,

disconnect power to the appliance and call an authorized servicer.

Baking

To set Bake:

1.Press the Bake pad.

,BAKEwill flash.

,000 will light in the display.

2.Select the oven temperature. The oven

temperature can be set from 170° to 550°. Press .............................

or press and hold the More+ or Less= pads.

' Less-

,350°will light when either pad is first pressed. ..............................

,Pressthe More+ pad to increase the temperature.

,Pressthe Less- pad to decrease the temperature.

. Press Bake pad again or wait four seconds.

, BAKEwill stop flashing and light in the display.

Locking the Control

and Oven Door

The touchpad controls and oven door can be locked for

safety, cleaning, or to prevent unwanted use. They will not function when locked.

If the oven is currently in use, the controls and door cannot be locked.

The current time of day will remain in the display when the controls are locked.

,100° or the actual oven temperature will display. The temperature will rise in 5° increments until the preset temperature is reached.

4.Allow the oven to preheat for 8-15 minutes.

,When the set oven temperature is reached, one long beep will sound.

,To recall the set temperature during preheat, press the Bake pad.

5.Place food in the oven.

6.Check cooking progress. Cook longer if needed.

7. When cooking is finished, press CANCEL. (_CAXI('FI_

8. Remove food from the oven.

13

Page 14
Image 14
Maytag AGS1740BDQ, AGS1740BDW, 8113P592-60 warranty Timer, Fault Codes, and Oven Door, Baking, Locking the Control, To lock