HP and 8150 MFP manual 448, Pcl Memory=

Appendix B Control Panel Menus		448
Item	Values	Explanation

PCL MEMORY=	0K and up
400K	(This value
	depends on
	the amount of
	installed
	memory.)

This item appears only when RESOURCE SAVE=ON. Select the amount of memory used for saving PCL resources. Printer default is the minimum amount of memory needed to perform resource saving for PCL. Press - VALUE + to change settings by increments of 10 (up to 100 KB) or by increments of 100 (above 100 KB).

For more information, see page 476.

PS MEMORY= 400K 0K and up

(This value depends on the amount of installed memory.)

This item appears only when RESOURCE SAVE=ON. Select the amount of memory used for saving PS resources. Printer default is the minimum amount of memory needed to perform resource saving for PS. Press - VALUE + to change settings by increments of 10 (up to 100 KB) or by increments of 100 (above 100 KB).

For more information, see page 476.

Configuration Menu