HP and 8150 MFP manual Advanced Printing Tasks 188

Chapter 3 Advanced Printing Tasks 188

2Press ITEM until PRINT TEST PAGE appears for the tray you want.

3 Press SELECT to print the page.

4Hold the printed page up to a light source and choose the number on each axis where the lines on the front and back of the page align most accurately.

5Repeat step 1.

6Press ITEM until TRAY n X= appears and use - VALUE + to enter the number you selected from the test page in step 4. Press SELECT to save this value.

7Repeat step 6 for the Y axis.

8Press ITEM to scroll up through the duplex registration menu until PRINT TEST PAGE appears for the tray you want.

9Press SELECT to print the page.

10Repeat step 4 to verify that the lines on the front and back of the page are now properly aligned.

Note	If the lines on the front and back of the page do not properly align, then
	repeat steps 4-9 until they are properly aligned.

Duplex Registration