HP and 8150 MFP manual Chapter Problem Solving 238 Printer Messages, RAM Disk, On Staples, Out

Chapter 5	Problem Solving	238
Printer Messages (continued)
Message	Explanation or Recommended Action

RAM DISK		FILE	The requested operation could not be performed. You might have
OPERATION		FAILED	attempted an illegal operation, such as trying to download a file to
			a non-existent directory.
RAM DISK		FILE	Delete files and then try again, or turn the printer off, and then turn
SYSTEM	IS	FULL	the printer on to delete all files on the device. (Delete files using
			HP LaserJet Resource Manager or another software utility. See the
			software help for more information.)
			If the message persists, increase the size of the RAM disk. Change
			the RAM disk size from the Configuration Menu in the printer’s
			control panel (page 445).
RESEND	UPGRADE		There is an error in the printer’s firmware flash. Resend a valid
			firmware image.
STAPLER	LOW		The stapler device is running out of staples and needs to be
ON STAPLES			refilled.
STAPLER	OUT OF		The stapler device is out of staples and needs to be reloaded.
STAPLES
TONER LOW			See page 194.

Understanding Printer Messages