HP and 8150 MFP manual Envelopes with Adhesive Strips or Flaps, Envelope Margins

Appendix A Specifications 408

Envelopes with Adhesive Strips or Flaps

Envelopes with a peel-off adhesive strip or with more than one flap that folds over to seal must use adhesives compatible with the heat and pressure in the printer. The extra flaps and strips might cause wrinkling, creasing, or jams.

Envelope Margins

The following table gives typical address margins for a Commercial #10 or DL envelope.

Type of Address		Top Margin	Left Margin
Return Address		0.5 in. (15 mm)	0.6 in. (15 mm)
Delivery Address		2 in. (51 mm)	4 in. (85 mm)
	For the best print quality, position margins no closer than 0.6 inch
Note
	(15 millimeters) from the edges of the envelope.

Paper Specifications