HP and 8150 MFP manual Loading Custom-size Paper, Advanced Printing Tasks 163

Chapter 3 Advanced Printing Tasks 163

Loading Custom-size Paper

Custom-size paper can be loaded into Tray 1 and, with the optional Custom Paper Tray accessories, into Trays 3 and 5. However, only one custom paper size can be defined in the control panel. This means that you can have several Custom Paper Trays, but you must put the same custom-size paper in all of them.

When custom-size paper is loaded into Tray 1, the printer prints at a slower speed because it picks up paper based on the maximum size of paper the printer supports. When custom-size paper is loaded in Trays 3 and 5, the printer prints at normal speed because it picks up paper based on the size defined in the control panel.

If a Custom Paper Tray is installed, you cannot print on both sides of custom-size paper.

1Load the custom-size paper in Tray 1, 3, or 5. See Loading Tray 1 on page 89 and Loading Trays 2, 3, and the Optional 2 x 500-sheet Input Tray (Trays 4 and 5) on page 93 for instructions.

2On the control panel, press MENU repeatedly until PRINTING MENU appears.

3 Press ITEM repeatedly until CONFIGURE CUSTOM PAPER=NO appears.

Continued on next page.

Loading Custom-size Paper