Chapter 5 Problem Solving

302

HP Fast InfraRed Connect Problems

SituationSolution

FIR port status indicator ! Make sure that the printer is in READY mode and that the

does not light up.FIR port you are printing from is IRDA-compliant and within the range of operation described in Printing a Job on page 182.

!Make sure that the HP Fast InfraRed Connect is properly connected to the printer.

!Run the printer Self Test. Make sure that FIR POD (IRDA Compliant) is printed under Installed Personalities and Options.

Correcting Output Quality Problems

Page 302
Image 302
HP and 8150 MFP manual Problem Solving 302 HP Fast InfraRed Connect Problems, SituationSolution