HP and 8150 MFP manual HP Digital Copy 355 Menu Tabs, Copy quality tab

Chapter 6 HP Digital Copy		355
Menu Tabs (continued)
output/staple tab	You can configure the output and stapling options using the
	two main controls on this tab.

!Output Bin - Shows the currently selected output bin. Choose which bin the copy job will be delivered to. If the output bin is set to the stapling bin and a stapling option is selected, then changing the output bin to another location will turn off the stapling option.

!Stapling - Allows you to choose stapling options. The number of options displayed will depend on the stapling device installed. If you select an option to have the output stapled, then the Output Bin setting will change to display that stapling can only take place in the staple bin.

copy quality tab	! Copy Mode - You may change the copy quality settings
	from this tab. There are three settings to choose from in
	Copy Mode:
	Auto - This is the default mode.
	Photo - This mode is optimized for photo clarity.
	Text - This mode is optimized for text sharpness.
	! Brightness - You may change the brightness setting from
	this tab. Press the left or right arrow to increase or
	decrease the brightness level as indicated by the slider.
	There are five settings for brightness.

HP Digital Copy Operating Instructions