HP and 8150 MFP manual Transparencies, Appendix a Specifications 405

Appendix A Specifications 405

Transparencies

Note For best results, use only Tray 1 and the Face-up Bin.

CAUTION Transparencies used in the printer must be able to withstand 392° F (200° C), the printer’s maximum fusing temperature. To avoid damaging the printer, use only transparencies recommended for use in laser printers.

Do not print on both sides of labels, transparencies, envelopes, custom paper, or paper heavier than 28 lb (105 g/m2). Damage to the printer and paper jamming might result.

If you have problems printing transparencies, use Tray 1.

To print transparencies, see page 137.

Paper Specifications