Chapter 5 Problem Solving

284

Problems with the Optional 5-bin Mailbox with Stapler

SituationSolution

The job was not stapled. Jobs sent to the stapler might not be stapled for one or more of the following reasons:

!The stapler is out of staples and AUTO CONTINUE is set to

ON.

!The wrong size or type of paper was used for the job.

!More than 20 pages were sent to the stapler, exceeding its capacity.

!The stapler has bent or broken staples in the stapler head. (See page 222.)

!A staple jam was recently cleared (up to 2 following jobs might not be stapled).

!The job was sent to a bin other than the stapler bin because the wrong size or type of paper was used for the job.

!One-page jobs will not be stapled.

!The interface cable between the mailbox and the stapler unit may be defective or not connected properly.

Correcting Output Quality Problems