Chapter 5 Problem Solving

277

Printer Ignores Font, Format, or Tray/Bin Selection (continued)

SituationSolution

Job went to a different bin than was expected.

The wrong size or type of paper was used for the job. (See page 392 for supported paper sizes.)

Job prints on the wrong side of the paper.

!Make sure you have loaded the paper correctly. (Starting on page 89.)

!If you are printing one-sided copies, load paper into Tray 1 with the side to be printed facing up. Load paper into Trays 2, 3, and the 2000-sheet Input Tray with the side to be printed facing down.

!If you are printing two-sided copies, load paper into Tray 1 with the first side to be printed facing down. Load paper into Trays 2, 3, and the 2000-sheet Input Tray with the first side to be printed facing up.

Correcting Output Quality Problems

Page 277
Image 277
HP and 8150 MFP manual SituationSolution