HP and 8150 MFP manual Resetting the HP TonerGauge, Printer Maintenance 193

Chapter 4 Printer Maintenance 193

Resetting the HP TonerGauge

After a new toner cartridge is installed, the user must reset the

HP TonerGauge from the control panel. When the top cover is closed after installing the new toner cartridge, the NEW TONER CARTRIDGE=NO message is displayed on the control panel for approximately 30 seconds. To reset the HP TonerGauge:

Note		If the NEW TONER CARTRIDGE=NO message is no longer displayed on the
		control panel, press MENU repeatedly until CONFIGURATION MENU appears.
		When you replace an empty or low toner cartridge, press ITEM repeatedly
		until NEW TONER CARTRIDGE=NO appears.
1	Press - VALUE + until YES appears.
2	Press SELECT to save the selection.
3	Press GO to exit the menu.

Managing the Toner Cartridge