HP and 8150 MFP manual Buffering, Appendix C Printer Memory and Expansion 478

Appendix C Printer Memory and Expansion 478

I/O Buffering

To allow the computer to continue working without waiting for the print job to finish queuing, the printer uses a portion of its memory (an I/O buffer) to hold jobs in progress. (If I/O buffering is off, no memory is reserved for this function.)

In most cases, it is best to let the printer automatically reserve memory for I/O buffering.

To speed network printing, you might want to increase the amount of memory reserved for I/O buffering.

To change the I/O Buffer setting:

1	From the I/O Menu, set I/O BUFFER=ON (page 457).
2	Also from the I/O Menu, set I/O SIZE to the desired value.
		When you change the I/O Buffer setting, all downloaded resources (such
Note
		as fonts or macros) will need to be downloaded again, unless they are
		stored on an optional hard disk or flash DIMM.

Adjusting Memory Settings