8. TROUBLESHOOTING
Ranging does not work. The display is transparent.
Check the charge of the battery. Replace it if it is weak.
Ranging does not work. The display indicates results of the last measurement.
Wait until display becomes transparent, and press the Action button again.
Compass readings are equal to zero at any direction.
Wait until display becomes transparent, and press the Action button again.
If this does not help, perform the compass calibration.
Black dots are visible on LCD
Liquid Crystal Display may have small black dots, scratches and other blemishes inherited from the manufacturing process. These flaws are strictly regulated by number, area and location and do not degrade the product's measurement capabilities.
Range measurement cannot be obtained.
•Make sure that neither your hand nor finger is blocking objective lens, laser emitting lens or receiver lens.
•Hold the unit firmly (avoid hand tremor) while pressing the Action button.
•Check that the target is within measuring range of the device and the gating mode does not cut it off.
20
