Newcon Optik LRB 3000PRO operation manual Data Recall mode

Data Recall mode

In Data Recall mode results of the last 10 measurements can be displayed.

Measurement results are saved in on-board memory in sets depending on the parameters set for measuring, for instance, if only distance is measured - the set will consist of one number, if distance and azimuth are measured – the set will consist of two numbers.

To enter Data Recall mode select rEc from main menu. First measurement set number (display name: rEc 1) will start flashing.

Pressing M button moves the unit along the list of measurement set numbers and measurement results: rEc 1, distance 1, azimuth 1,

rEc 2, distance 2, azimuth 2, rEc 0, distance 0, azimuth 0.

Measurement sets are numbered in reverse order: first recalled set is the result of the last measurement. If any parameter has not been actually measured it will not be recalled.

Pressing A button at any moment within the list of recalled results brings the unit to Ready to Measure mode.

Choosing cLr at the end of recalled data will erase the device memory.

17