smaller, the farther, and the less reflective is the target – the higher is the possibility of obtaining an incorrect measurement.
To improve accuracy the unit has a
This mechanism helps selecting the target when ranging from behind the bushes, wires, through the falling snow, or in similar conditions. Similarly it enables ranging a target in front of a bigger object, such as a wire in front of the wall. Note: Even with target selection logic the unit may not always be able to range the desired target as its reflectivity may be too low to produce enough laser beam reflections for statistically reliable calculation.
Individual Measurement and Scanning regimes
The unit can operate in two regimes: (1) Individual Measurement and (2) Scanning. In the Individual Measurement regime the unit performs single measurement when the A button is pressed shortly, in Scanning regime the unit repeatedly measures and displays results every second while the A button is pressed.
To activate the Scanning regime press and hold the A button in the Ready mode. The unit will work in the Scanning regime while the A button is pressed.
The Scanning or Individual Measurement regimes are available for any selected mode of measurement. When two
12
