HP and 8150 MFP manual Appendix C Printer Memory and Expansion 472

Appendix C Printer Memory and Expansion 472

3Grasp the screws and pull the formatter board out of the printer. Place it on a flat, non-conductive surface.

4Remove the DIMM from the antistatic package. Hold the DIMM with fingers against the side edges and thumbs against the back edge. Align the notches on the DIMM with the DIMM slot. (Check that the locks on each side of the DIMM slot are open, or outward.)

3

4

See Maximum Memory Configuration on page 474 for the maximum amount of memory for each DIMM slot.

5Press the DIMM straight into the slot (press firmly). Snap the locks on each side of the DIMM inward to secure the DIMM into the connector. (To remove a DIMM, the locks must be released.)

Continued on next page.

5

FLASH

J10

J6

J7

Installing Memory